Manual

Table Of Contents
3. Click the Add button. The MAC Access Control: Add a Record window appears.
4. Enter the hexadecimal MAC address (for example, 00:11:22:33:44:55) that you want to grant or deny access in the Host MAC
box.
5.
Click the OK button to apply, or click the Cancel button to exit without making any changes.
6.
You can click on the selected record and click again on its Host Name to enter the desired name for this record.
7.
Click the Apply MAC Control Settings button on the bottom of the screen to activate the new settings.
Back to Top
Administration
Administration
System Rescue
System Rescue allows you to save a backup of your configuration settings.
·
Save Current System Configuration To File
Saves the current settings as a .pro file.
·
Load System Configuration Manually
Loads the backup file to restore previously saved settings.
·
Reset to Factory Default Settings
Resets the router to its default configuration.