Service Manual

Table Of Contents
CAUTION: Removing the SIM card with the computer turned on, may cause data loss or damage to the card.
Ensure that your computer is turned off or the network connections are disabled.
About this task
The following images indicate the location of the SIM card and provide a visual representation of the removal procedure.
Steps
1. Insert a pin into the hole of the SIM card tray and push inward until the tray is released
2. Slide the SIM card tray out of the slot on the computer.
3. Remove the SIM card from the SIM card tray.
4. Slide the SIM card tray into the slot, until it clicks into place.
Installing the SIM card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
NOTE:
SIM card or SIM card tray removal is only available on systems that are shipped with WWAN module. Hence,
removing procedure is only applicable for systems that are shipped with WWAN module.
About this task
The following image indicates the location of the SIM card and provides a visual representation of the installation procedure.
16
Removing and installing components