User`s guide

1. Connect the headphones to the audio port (3.5 mm) on the tablet.

2. Insert the earphones in your ears and adjust the volume level to a comfortable level.

NOTE: When you connect a headphone or an external audio device to the audio connector, the

integrated speakers on your tablet are muted automatically.

CAUTION: To prevent damage to the headphones when disconnecting it from the tablet, pull the

connector and not the cable.

NOTE: It is recommended that you turn down the volume level before plugging the headphone,

and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.

Removing the Micro-SD card

CAUTION: Removing the Micro-SD card when transferring data may cause data loss or result in

application errors. Make sure your tablet has finished all save operations to the Micro-SD card.

1. Enter the Desktop mode. Touch Safely Remove Hardware in the notification area at the

bottom-right corner of the screen.

NOTE: If you don’t see Safely Remove Hardware , touch Show Hidden Icons to display all

icons in the notification area.

2. Touch Eject SD Memory Card. A message appears confirming that the Micro-SD card can be safely

removed. If a warning message appears stating the Micro-SD card cannot be removed, ensure all

data transfers involving the Micro-SD card are complete.

3. Insert the tip of a small bent paperclip into the small hole on the micro-SD slot cover.

4. Push the tip all the way into the hole until the micro-SD tray ejects. Pull the micro-SD card tray out.

5. Remove the micro-SD card from the tray.

Installing the Micro-SD Card Tray

1. Place the SD card on the SD card tray.

2. Push the SD card tray to its place until it clicks into place.