About Your Printer Identifying Your Printer Understanding the Operator Panel Using the Operator Panel Menus Identifying Your Printer The printer is available in two base models. The following table indicates some of the differences between the models.
NOTE: You can install up to four optional paper trays, or three trays and a duplex unit. Number: Part: 1 Output expander (650 sheets) 2 Tray 1/Standard tray (500 sheets) 3 Duplex unit (500 sheets) 4 Envelope feeder (85 envelopes) 5 Tray 2 (250 or 500 sheets) 6 Tray 3 (250 or 500 sheets) 7 Tray 4 (250 or 500 sheets) CAUTION: Floor-mounted configurations require additional furniture for stability.
used to scroll through text that will not fit on the screen. 4 Select button Initiate action on a selection. Press Select when the cursor appears next to the selection you want such as following a link, submitting a configuration item, or when you want to start or cancel a job. 5 Back button Return to the last screen you viewed. 6 Cancel button Stop the mechanical operation of the printer. After pressing Cancel, the message Stopping appears.
Appendix Dell Technical Support Policy Contacting Dell Warranty and Return Policy Dell Technical Support Policy Technician-assisted technical support requires the cooperation and participation of the customer in the troubleshooting process and provides for restoration of the Operating System, application software and hardware drivers to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of the printer and all Dell-installed hardware.
BSD License and Warranty Statements Copyright (c) 1991 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Finding Information What are you looking for? l l Drivers for my printer My User's Guide Find it here Drivers and Utilities CD Use the CD to uninstall/reinstall drivers or access your documentation. Readme files may be included on your CD to provide last-minute updates about technical changes to your printer or advanced technical reference material for experienced users or technicians.
GNU License GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
2. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 11. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price.
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms.
portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License.
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
Dell™ Laser Printer 5210n / 5310n User's Guide Click the links to the left for information on the features and operation of your printer. For information on other documentation included with your printer, see Finding Information. To order supplies from Dell: 1. Double-click the icon on your desktop. 2. Visit Dell's website: www.dell.com/supplies 3. Order Dell printer supplies by phone. Refer to the Owner's Manual for the correct phone number for your country.
Clearing Jams Identifying Jams Clearing Printer Jams By carefully selecting print media and loading it properly, you should be able to avoid most paper jams. For more information on avoiding paper jams, see Avoiding Jams. If jams do occur, follow the steps outlined in this section. To resolve the paper jam messages, you must clear the entire paper path and then press the Select button to clear the message and resume printing.
Although there are several places a jam can occur, clearing the paper path is fairly easy depending on the jam message or messages displayed on the operator panel. Paper jams can occur in three areas: the front of the printer, inside the printer, and at the rear of the printer. Jams in the front of the printer occur in the input options or the duplex tray. Jams inside the printer occur in two locations and require the removal of the print cartridge.
5. Pull the print media up and toward you. NOTE: The print media may be covered with unfused toner, which can stain garments and skin. NOTICE: If the print media does not move immediately when you pull, stop pulling. You need to access the print media from the printer rear door. CAUTION: Do not use any pointed objects to remove the paper. This could cause personal injury or damage to the printer. 6. Align and reinstall the toner cartridge. 7. Close the top front cover. 8.
9. Press the Select button . 202 Paper Jam Open Rear Door 1. If the paper is exiting the printer, pull the media straight out, and press the Select button 2. Open the printer rear door. . Otherwise, continue with step 2. CAUTION: The inside of the printer may be hot. Allow the printer to cool before touching any internal components. 3. Remove the jammed media. CAUTION: Do not use any pointed objects to remove the paper. This could cause personal injury or damage to the printer. 4.
23x Paper Jam Open Duplex Rear Door 1. Open the duplex rear door. 2. Remove the jammed media. Depending on the media location, pull the media either up or down. 3. Close the duplex rear door. Make sure it snaps into place. 4. Press the Select button . 23x and 24x Jams Paper jams in these areas can occur on the incline surface of a tray or across more than one tray. To clear these areas: 1. Open the printer paper tray, and remove any jammed media. Downloaded from ManualsPrinter.
2. Open the duplex tray, and remove the media by pulling up. 3. Open any optional trays beginning at the top, and remove any jammed media. Pull the print media either up or down. If it does not pull easily one way, try the other way. 4. Press the Select button . 250 Paper Jam Check MP Feeder 1. Remove the paper from the multipurpose feeder. Downloaded from ManualsPrinter.
2. Flex, fan, and restack the media. 3. Load the print media. 4. Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media. 5. Press the Select button . 260 Paper Jam Check Env Feeder The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed. 1. Lift the envelope weight. Downloaded from ManualsPrinter.
2. Remove all envelopes. If the jammed envelope has entered the printer and cannot be pulled out, remove the envelope feeder. a. Lift the envelope feeder up out of the printer, and then set it aside. b. Remove the envelope from the printer. NOTE: If you cannot remove the envelope, the print cartridge will have to be removed. See 200 and 201 Paper Jam Remove Cartridge for more information. c. Reinstall the envelope feeder. Make sure it snaps into place. 3. Flex and stack the envelopes. 4.
6. Lower the envelope weight. 7. Press the Select button . 27x Paper Jam Check Bin x To clear a jam in the output expander: 1. If the paper is exiting into the bin, pull the media straight out, and press the Select button 2. Push the output bin rear door latches in toward the center. The rear doors will open and drop down. NOTE: If you only have one output option, you may only have one rear door. Downloaded from ManualsPrinter.com Manuals . Otherwise, continue with step 2.
3. Remove the jammed media. 4. Close the output bin rear doors, and make sure all doors are secure. 5. Press the Select button . Downloaded from ManualsPrinter.
Licensing Notice The printer resident software contains: l Software developed and copyrighted by Dell and/or third parties l Dell modified software licensed under the provisions of the GNU General Public License version 2 and the GNU Lesser General Public License version 2.
Installing Drivers for Local Printing Windows Macintosh Linux/UNIX A local printer is a printer attached to one computer using a USB or parallel cable. If your printer is attached to a network instead of your computer, go to Installing Drivers for Network Printing. A printer driver is software that lets your computer communicate with your printer. Use the following table to find the instructions you need for your operating system.
In all others, click Start®Settings®Printers. 3. Double-click Add Printer. 4. Click Next. 5. Select Local printer attached to this computer, and then click Next. 6. Select the port you want your printer to use, and then click Next. 7. Select Have Disk. 8. Browse to your CD drive and select the correct driver for your operating system.
NOTE: A PPD file provides detailed information about the capabilities of a printer to the Macintosh computer. c. Choose the appropriate language, and click Continue. d. Click Continue after viewing the Readme file. e. Click Continue after viewing the license agreement, and click Agree to accept the terms of the agreement. f. g. 2. On the Installation Type screen, click Install. All the necessary files are installed on the computer. Click Close when installation is complete.
l SuSE Linux Linux System Requirements Printer drivers has minimum Linux installation space requirements of 70MB in /usr/local. Installing on RedHat Linux or SuSE Linux 1. Read Before Installing. 2. Mount the CD. 3. Change your directory to the package file directory. If you mounted your CD-ROM to /mnt/cdrom: # cd /mnt/cdrom/unix/packages 4. Install the package file: # rpm -ivh print-drivers-linux-glibc2-x86.rpm 5.
a. To accept the defaults, press Enter. b. To answer yes/no questions, type y, n, or ? , and then press Enter. c. When a message appears telling you the installation was successful, type q to quit. Removing Print Drivers A system administrator removes printer drivers using the utilities listed in this table.
Maintaining the Printer Moving the Printer Maintaining Printer Supplies Replacing the Toner Cartridge Replacing Maintenance Kit Items Periodically, you need to complete certain tasks to maintain optimum print quality. These tasks are covered in this chapter. If several people are using the printer, you may want to designate a key operator to do the setup and maintenance of the printer. Refer printing problems and maintenance tasks to this key operator.
must be securely fastened to its pallet. Do not use a shipping or transport method that requires the printer to be shipped without a pallet. The printer must stay upright throughout the shipment. If you do not have all the original packaging, contact your local service representative to order the repackaging kit. Additional instructions for repackaging the printer are provided in the repackaging kit. Maintaining Printer Supplies Ordering Supplies To order supplies, visit Dell's website: www.dell.
Duplex in the Settings® Finishing Menu Duplex printing is available when you install an optional duplex unit. It lets you print on both sides of a sheet of paper. Use your software application or printer driver to send a Verify Print job. Lets you examine the first copy of a multiple-copy job to be sure it is satisfactory before you print the other copies. If the job is unsatisfactory, you can cancel the job. See Printing and Deleting Held jobs for more information about a Verify Print job.
3. Pull the print cartridge up and out of the printer. CAUTION: When replacing a toner cartridge, do not leave the new cartridge exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems. 4. Unpack the new toner cartridge. Remove and discard the print cartridge's protective foam, red plastic strap, and tape. 5. Thoroughly shake the cartridge side-to-side and front-to-back several times to distribute toner evenly. 6.
7. Close the top front cover. 8. Close the multipurpose feeder. Replacing Maintenance Kit Items Replacing the Charge Rolls Order a new charge roll kit when toner fog or background shading appears on printed pages. 1. Turn the printer off, and unplug the printer power cord. 2. Pull on the notch on the front of the printer to lower the multipurpose feeder. Downloaded from ManualsPrinter.
3. Push the release latch to the right to open the top front cover. 4. Pull the print cartridge up and out of the printer. 5. Attach the cardboard cover retainer to the hook on the printer. 6. Insert the hook on the bottom of the cardboard cover retainer into the slot on the printer. You will need to lower the top front cover to do this. 7. Locate the used charge roll above the area for the print cartridge. 8. Pull the charge roll to the left until charge roll drops out of the right side.
9. Pull the charge roll to the right and out of the printer. 10. Align the blue tab on the left side of the charge roll with its hole in the arm marked with the corresponding blue arrow, and insert it. Pull the charge roll to the left. 11. Lift the right side of the charge roll and insert it into its hole. 12. Remove the packaging from the charge roll. Downloaded from ManualsPrinter.
13. Remove the cardboard cover retainer. 14. Reinstall the print cartridge into the printer. 15. Close the top front cover. 16. Close the multipurpose feeder. Downloaded from ManualsPrinter.
17. Plug the printer power cord into a properly grounded electrical outlet. Replacing the Transfer Roller Order a new transfer roller when light print, toner fog, or background shading appears on printed pages. 1. Turn the printer off, and unplug the printer power cord. 2. Pull on the notch on the front of the printer to lower the multipurpose feeder. 3. Push the release latch to the right to open the top front cover. 4. Pull the print cartridge up and out of the printer. 5.
7. Lift the transfer roll and pull it straight out of the printer. Set it aside. 8. Remove any packaging from the new transfer roller. 9. Locate the small hole on the right side of the printer, and insert the metal tab on the right side of the transfer roller into the hole. 10. Lower the transfer roller gently until the left metal tab fits into the slot. You may have to push it down for a secure fit. 11. Reinstall the print cartridge into the printer. Downloaded from ManualsPrinter.
12. Close the top front cover. 13. Close the multipurpose feeder. 14. Plug the printer power cord into a properly grounded electrical outlet. Replacing the Pick Rollers 1. Remove the standard tray. 2. Look underneath the printer for the pick roller arm and pull it down. Downloaded from ManualsPrinter.
3. Press on the end of the tab. 4. Pull the pick roller off the arm. 5. Repeat step 3 and step 4 on the other side to remove the other pick roller. 6. Gently release the pick roller arm. 7. Discard the used pick rollers. 8. Remove the two pick rollers from the packaging. 9. Pull the pick roller arm down. 10. Locate the recessed area on the pick roller, and align it with the tab on the arm. NOTE: There are two arrows on each pick roller.
12. Repeat step 10 and step 11 to install the other pick roller. 13. Gently release the pick roller arm. 14. Insert the standard tray. Downloaded from ManualsPrinter.
Understanding Paper and Specialty Media Guidelines Supported Print Media Selecting Print Media Storing Print Media Avoiding Jams Print media is paper, card stock, transparencies, labels, and envelopes. The printer provides high quality printing on a variety of print media. You must consider a number of things concerning print media before you print. This chapter provides information to help you make print media selections.
JIS B5 7.17 x 10.1 in. (182 x 257 mm) Letter 8.5 x 11 in. (216 x 279 mm) Legal 8.5 x 14 in. (216 x 356 mm) Executive 7.25 x 10.5 in. (184 x 267 mm) Folio1 8.5 x 13 in. (216 x 330 mm) Statement1 5.5 x 8.5 in. (140 x 216 mm) Universal2 5.5 x 8.27 in. to 8.5 x 14 in. (140 x 210 mm to 216 x 356 mm) 2.75 x 5 in. to 8.5 x 14 in. (70 x 127 mm to 216 x 356 mm) 2.75 x 5 in. to 9.01 x 14 in. (70 x 127 mm to 229 x 356 mm) 5.83 x 7.17 in. to 8.5 x 14 in. (148 x 182 mm to 216 x 356 mm) 7 ¾ Envelope 3.
Optional 500-sheet drawer A4 8.27 x 11.7 in. (210 x 297 mm) A5 5.83 x 8.27 in. (148 x 210 mm) JIS B5 7.17 x 10.1 in. (182 x 257 mm) Letter 8.5 x 11 in. (216 x 279 mm) Legal 8.5 x 14 in. (216 x 356 mm) Executive 7.25 x 10.5 in. (184 x 267 mm) Folio1 8.5 x 13 in. (216 x 330 mm) 1 Statement 5.5 x 8.5 in. (140 x 216 mm) Universal2 5.5 x 8.27 in. to 8.5 x 14 in. (140 x 210 mm to 216 x 356 mm) 2.75 x 5 in. to 9.01 x 14 in. (70 x 127 mm to 229 x 356 mm) 5.83 x 7.17 in. to 8.5 x 14 in.
Labels — maximum Paper (37 to 39 lb bond) (37 to 39 lb bond) 180 g/m2 (48 lb bond) 163 g/m2 (43 lb bond) (37 to 39 lb bond) N/A 180 g/m2 (48 lb bond) NOTE: Not supported in the multipurpose feeder. Dual-web paper 180 g/m2 (48 lb bond) 163 g/m2 (43 lb bond) 180 g/m2 (48 lb bond) Not supported in the multipurpose feeder. Polyester 220 g/m2 (59 lb bond) 220 g/m2 (59 lb bond) 220 g/m2 (59 lb bond) NOTE: Not supported in the multipurpose feeder.
The following papers are not recommended for use with the printer: l Some chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper l Preprinted papers with chemicals that may contaminate the printer l Preprinted papers that can be affected by the temperature in the printer fuser l Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in.
The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long in the integrated and optional 500-sheet trays and paper weights from 60 to 135 g/m2 (16 to 36 lb bond) grain long in the multipurpose feeder and optional 250-sheet trays. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75 g/m2 (20 lb bond) grain long paper. When using paper narrower than 182 x 257 mm (7.2 x 10.1 in.
using with the printer before buying large quantities. See Loading the Multipurpose Feeder and Loading the Envelope Feeder for instructions on loading envelopes. NOTE: When using the envelope feeder, you may hear a "thumping" noise. This noise is normal; it occurs when trapped air is forced out of the envelopes before printing. When printing on envelopes: l To achieve the best possible print quality, use only high-quality envelopes that are designed for use in laser printers.
l Do not use label sheets with a slick backing material. l Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and your cartridge with adhesive, and could void the printer and cartridge warranties. l Use labels that can withstand temperatures of 230°C (446°F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions. l Do not print within 1 mm (0.04 in.
Avoiding Jams Use appropriate print media (paper, transparencies, labels, and card stock) to help ensure trouble-free printing. See Supported Print Media for more information. NOTE: Try a limited sample of any print media you are considering using with the printer before purchasing large quantities. By selecting the appropriate print media and loading it properly, you can avoid most jams.
Understanding the Operator Panel Menus Paper Menu Reports Settings Security Network/Ports A number of menus are available to make it easy for you to change printer settings. The diagram shows the menu index on the operator panel, the menus, and items available under each menu. The items in each menu and the values you can select are described in more detail later in this chapter. Some menu items or values are displayed only if a specific option is installed on the printer.
Letter* (US) Legal Executive Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope Other Envelope MP Feeder Size/Type Identifies the type of paper installed in the multipurpose feeder. NOTE: If a user-defined name is available, it appears instead of Custom Type . If two or more custom types share the same name, the name only appears once in the Paper Type value list.
Substitute Size Substitutes the specified paper size if the requested size is not loaded. Off Statement/A5 Letter/A4 All Listed* l l The Off value indicates no size substitutions are allowed. The All Listed value indicates that all available substitutions are allowed. Paper Texture This menu selection is used to set the media texture for each of the defined media types. This allows the printer to optimize the print quality for the specified media.
single-sided job. Off* Card Stock Loading Properly handles preprinted card stock whether the job is a duplexed or single-sided job. Duplex Shown if Card Stock is supported in the specified Off* input source. Custom Loading Properly handles preprinted custom paper whether the job is a duplexed or single-sided job. Duplex Shown if the custom type is supported in the Off* specified input source.
user until it is full, and then sends jobs to the designated overflow bin. Assign Type/Bin Link Optional Links all optional output bins as though they were one large bin, while leaving the standard bin individually addressable. Type Assignment Sends each job to the output bin specified for that paper type. Sends print jobs to a specific output bin based on the requested paper type. Plain Paper Bin NOTE: If a user-defined name is available, it appears instead of Custom Bin.
Print Fonts This menu selection prints a list of the fonts stored in the printer. Menu selection: Purpose: Values: Print Fonts Prints a sample of all the fonts available for the selected printer language. PCL Fonts Prints a sample of all printer fonts available for PCL emulation. PS Fonts Prints a sample of all printer fonts available for PostScript emulation. Settings Setup Menu Use this menu selection to configure a variety of printer features.
When the timer expires, any partially formatted page still in the printer is printed, and other input ports are examined to see if data exists. 90* is the default setting. Wait Timeout: Disabled 15...65535 (40*) Disabled — Disables Wait Timeout. 15...65535 — Specifies the amount of time the printer waits for additional data before it cancels the job. 40* is the default setting.
Bind how the printing on the back of the sheet (evennumbered pages) is oriented in relation to the printing on the front (odd-numbered pages). NOTE: You must have an optional duplex unit installed. Copies Sets the number of copies you want for the printer default value. Edge* orientation and top edge for landscape orientation). Short Edge Assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation). 1...
Use this menu selection to change settings that affect print quality and save toner. Menu selection: Purpose: Values: Print Resolution To select printed output resolution. 600 dpi* 1200 Image Quality 1200 dpi 2400 Image Quality Toner Darkness Lightens or darkens printed output and conserves toner. 1–10 Brightness Adjusts the gray value of printed objects. -6 – +6 0* is the default setting. Contrast Adjusts the contrast of printed objects. 0–5 0* is the default setting.
displayed in the Font Name menu item. Disk Displays all fonts downloaded to printer RAM. Flash Displays all fonts stored in flash memory. Download Displays all fonts stored on the printer hard disk. NOTE: The hard disk is an optional item and is not included in the printer. Contact your local Dell Sales Representative to determine availability. All Displays all fonts available to the printer from all sources. Font Name Identifies a specific font from the specified font source.
Security This menu selection is used to set security levels on individual print jobs requiring a PIN. Menu selection: Purpose: Values: Job Expiration Limits the amount of time a confidential job stays in the printer before it is deleted. Off* 1 hour 4 hours 24 hours 1 week Network/Ports TCP/IP This menu section is use to view and change the Transmission Control Protocol/Internet Protocol settings. NOTE: This menu is not displayed for non-network models.
Mac Binary PS NOTE: Changing the Network Buffer menu item automatically resets the printer. 3K to maximum size allowed (1k increments) User specifies the Network Buffer size. The maximum size depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel, serial, and USB buffers.
parallel port requires it, regardless of the default printer language. NPA Mode Parallel Buffer printer language. Off Specifies whether the printer performs the special processing On required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Off Printer does not examine the incoming data.
Menu selection: Purpose: Values: View Name Displays the assigned AppleTalk name. Selecting View Name displays the AppleTalk name on the operator panel. View Address Displays the assigned AppleTalk address. Selecting View Address displays the AppleTalk address on the operator panel. Activate Activates or deactivates the AppleTalk feature. On Activates the AppleTalk feature. Off Deactivates the AppleTalk feature. Provides a list of zones from network.
Understanding the Operator Panel Messages The printer operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This chapter provides a list of all printer messages, explains what they mean, and tells you how to clear the messages. The following table lists the messages in alphanumerical order. You can also locate a message using the index. Message Action 30 Invalid refill, change cartridge Install a new cartridge.
51 Defective flash detected Press the Select button to clear the message and continue printing. You must install different flash memory before you can download any resources to flash. For more information, see Installing Printer Memory. 52 Not enough free space in flash memory for resources l Press the Select button to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted.
88 Toner is low 200.yy Paper jam 201.yy Paper jam 202.yy Paper jam 231.yy Paper jam 232.yy Paper jam 233.yy Paper jam 234.yy Paper jam 235.yy Paper jam 236.yy Paper jam 237.yy Paper jam 238.yy Paper jam 239.yy Paper jam 24x.yy Paper jam 250.yy Paper jam 260.yy Paper jam 27x.yy Paper jam 280.yy Paper jam 281.yy Paper jam 900–999 Service l Replace the toner cartridge. For more information, see Replacing the Toner Cartridge.
Cancel not available Wait for the message to clear. Cancelling Wait for the message to clear. Change Change l l l Press the Select button if you have changed the media. Select Use current to print on media currently in the printer. Cancel the current job. Change Change Check duplex connection l Turn the printer off and back on.
Internal System Error Reload Bookmarks l Reload the Bookmarks. l Press the Select button Internal System Error, Reload Security Certificates l Reload the Security Certificates. l Press the Select button Invalid Network Code to clear the message and continue printing. to clear the message and continue printing. Download valid code to the internal print server. NOTE: You can download network code while this message is displayed. Invalid Engine Code Download valid engine code to the printer.
Reattach bins - Reattach envelope feeder Remote Management Active DO NOT POWER OFF l Turn the printer off and back on. ¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the specified bins, then reattach the bin to the printer, r, and then restart the printer. ¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the specified bin, and call for service.
Installing Drivers for Network Printing Printing a Network Setup Page Assigning a Printer IP Address Verifying the IP Settings Windows Macintosh Linux/UNIX NetWare Printing a Network Setup Page If the printer is attached to a network, print a network setup page on the printer to verify the network connection. This page also provides important information to configure the printer for network printing. 1. Make sure the printer is on. 2. Press the Menu button 3.
8. Press the Down arrow button until appears next to Gateway, and then press the Select button 9. Using the numeric pad, enter the IP gateway. When the address is entered, press the Select button . . Submitting Selection appears briefly. 10. Press the Select button until the printer returns to Ready. Verifying the IP Settings 1. Print another network setup page. Look under the "TCP/IP" heading, and make sure the IP address, netmask, and gateway are correct.
For remote installation: a. Select Install printer on one or more remote computers, and then click Next. b. Enter your Administrator user name and password, and then click Add. c. Select the clients or servers, and then click Next. 5. Select the network printer you would like to install. If you do not see your printer listed, click Update to refresh the list, or click Add Printer to add a printer to the network. 6. Select I am setting up this printer on a server, and then click Next. 7.
NOTE: Windows XP Professional x64, Windows XP Professional, and Windows NT require that you have administrative access to install printer drivers on your computer. 1. Turn on your computer and insert the Drivers and Utilities CD. The Drivers and Utilities CD should automatically launch. This may take a few seconds. If the CD doesn't launch automatically, browse to the CD drive, and double-click setup.exe. 2. 3.
NOTE: If you need to set up your printer in a mixed 32-bit and 64-bit operating system environment, consult your Network Administrator about which printer driver to use. For more information about printing in a mixed environment, visit support.dell.com. You can use Microsoft's Point and Print or Peer-to-Peer methods to share a printer on the network with a USB or parallel cable connection. To use one of these methods, you must first share the printer and then install the shared printer on client computers.
If you use the Peer-to-Peer method, the printer driver is fully installed on each client computer. Network clients retain control of driver modifications. The client computer handles the print job processing. 1. In Windows XP, click Start®Control Panel®Printers and Other Hardware®Printers and Faxes. In all others, click Start®Settings®Printers. 2. Click Add Printer to launch the Add Printer wizard. 3. Click Network Print Server. 4. Select the network printer from the Shared printers list.
1. Open Finder, click Applications, and click Utilities. 2. Double-click Print Center or Printer Setup Utility. 3. Choose Add Printer from the "Printers" menu. 4. Choose AppleTalk from the pop-up menu. NOTE: Look on the network setup page under the "AppleTalk" heading to know which zone or printer to select. 5. Select the AppleTalk zone from the list. 6. Select the new printer from the list, and click Add. 7. Verify printer installation: a. Open Finder, click Applications, and click TextEdit.
Zone. 3. Select the new printer from the list. 4. To know which printer to select, look on the Network Setup page under the "AppleTalk" heading to find the default name of the printer. 5. Click Create. 6. Make sure there is an icon next to the printer name in the Chooser. 7. Close the Chooser window. 8. Verify printer installation. a. Click the newly created desktop printer icon. b. Choose Printing® Change Setup.
1. Read Before Installing. 2. Mount the CD. 3. Change your directory to the package file directory. If you mounted your CD-ROM to /mnt/cdrom: # cd /mnt/cdrom/unix/packages 4. Install the package file: # rpm -ivh print-drivers-linux-glibc2-x86.rpm 5. Run the following setup script to complete the installation: # /usr/local/dell/setup.dellprint NOTE: Your specific printer driver may not be included in the standard package.
Depending on your operating system, you mark the printer drivers packages for removal after you start the program, or you type the names of the printer drivers package names you want to remove on the command line. See your operating system documentation for more information. Operating system Package removal tool RedHat Linux and SuSE Linux rpm -e Linspire Linux, and Debian GNU/Linux dpkg -r Run the uninstall script to remove symbolic links created during installation: //usr/local/dell/DELLPrtDrv.
Other Third-Party Licenses (Software) The Apache Software License, Version 1.1 Copyright (c) 2000 The Apache Software Foundation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
"This product includes software developed by the JDOM Project (http://www.jdom.org/)." Alternatively, the acknowledgment may be graphical using the logos available at http://www.jdom.org/images/logos. THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that companies distributing free software will individually obtain patent licenses, thus in effect transforming the program into proprietary software. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License, which was designed for utility programs.
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 11.
, 1 April 1990 Ty Coon, President of Vice That's all there is to it! wxWindows Library Licence, Version 3 Copyright (C) 1998 Julian Smart, Robert Roebling [, ...] Everyone is permitted to copy and distribute verbatim copies of this licence document, but changing it is not allowed.
Installing and Removing Options Order of Installation Installing a 250-Sheet or 500-Sheet Drawer Installing a Duplex Unit Installing an Output Expander Installing an Envelope Feeder Installing Printer Memory Installing Font ROMs Order of Installation Floor-mounted configurations require additional furniture. You must use either a printer stand or printer base if you are using more than one input option or a duplex unit and an input option. NOTE: Furniture options may not be available in all regions.
2. Place the support unit on top of any previously installed drawers or the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you position the support unit so the edges are aligned properly. Make sure the support unit is securely in place. 3. Attach another optional drawer, a duplex unit, or the printer. You can attach a label to the trays to indicate the tray number. 4.
1. Place the duplex unit on top of any installed drawers or the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you position the duplex unit so the edges are aligned properly. Make sure it is securely in place. 2. Attach the printer. 3. In Windows XP, click Start® Control Panel® Printers and Other Hardware® Printers and Faxes. In all others, click Start® Settings® Printers. 4.
Number Part 1 Bin 2 Labels 3 Bracket and wire bail 4 Support NOTICE: The output expander bin is designed to hold the weight of print media only. Excess weight may cause it to disengage from the support. After you carefully unpack the output expander, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics. 1. Remove the top cover from the printer, finisher, or high-capacity output stacker. 2.
5. Slide the lower tabs on the tray into the lower slots on the output expander. 6. Rotate the tray up until the upper tabs snap into the upper slots. 7. If you are not attaching any more print media handling options, attach the top cover to the output expander. Installing an Envelope Feeder The envelope feeder attaches to the front of your printer behind the multipurpose feeder. It can be removed when you are not using it, making the printer more compact. 1.
The envelope feeder tilts downward at a slight angle when it is installed properly. Installing Printer Memory CAUTION: If you are installing printer memory sometime after setting up the printer, turn the printer off, and unplug the power cord before continuing. Installing a Printer Memory Card NOTE: Printer memory cards designed for other printers may not work with the printer. Use only Dell printer memory cards to ensure compatibility. 1. Open the side door.
6. Make sure each latch fits over the notch on the end of the card. 7. Close the side door. Removing a Printer Memory Card 1. Open the side door. NOTICE: Printer memory memory cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card. 2. Push the latches away from the card on both ends of the printer memory card connector. The memory card moves out of the connector as the latches open. Downloaded from ManualsPrinter.
3. Pull the memory card out of the connector. Avoid touching the connection points along the edge of the card. 4. Place the card into the original packaging. If you do not have the original packaging, wrap the card in paper, and store it in a box. 5. Close both latches. 6. Close the side door. Installing Font ROMs NOTE: Font ROMs may not be available in all regions. Contact your Dell Sales Representative to determine Font ROM availability.
NOTE: If an option card has been installed, you may need to remove the option card before installing the Font ROM. 2. Unpack the Font ROM. NOTICE: Font ROMs are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card. 3. Holding the Font ROM by the locking clips, align the plastic pins on the card with the holes on the system board. 4. Push the Font ROM firmly into place, and release the locking clips.
1. Open the side door. NOTE: If an option card has been installed, you may need to remove the option card before removing the Font ROM. 2. Squeeze the Font ROM locking clips. NOTICE: Font ROMs are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card. 3. Pull the card out. Avoid touching the metal pins on the bottom of the card. 4. Place the Font ROM in its original packaging.
Downloaded from ManualsPrinter.
Printing Sending a Job to Print Canceling a Print Job Printing the Menu Settings Page Printing a Network Setup Page Printing a Font Sample List Printing a Directory List Printing Confidential and Held Jobs Printing on Specialty Media Loading Standard Trays and Optional Trays Setting the Paper Type and Paper Size Loading the Multipurpose Feeder Loading the Envelope Feeder Linking Trays Identifying and Linking Output Bins This chapter covers information about sending a job to print, printing confidential job
¡ l Canceling a Job From the Desktop Canceling a Job From a Macintosh Computer ¡ Canceling a Print Job From a Computer Running Mac OS 9 ¡ Canceling a Job From a Computer Running Mac OS X Canceling a Job From the Printer Operator Panel If the job is formatting or already printing, and Cancel a Job appears on the first line of the display: 1. Press the Select button on the operator panel. A list of jobs appears. 2.
When you send a job to print, the printer icon for your selected printer appears in the dock. 1. Open Applications® Utilities, and then double-click Print Center or Printer Setup. 2. Double-click the printer you are printing to. 3. In the printer window, select the print job you want to cancel. 4. Press Delete. Printing the Menu Settings Page You can print a menu settings page to review the default printer settings and to verify the printer options are installed correctly. 1.
3. Press the Down arrow button until appears next to Reports, and then press the Select button . 4. Press the Down arrow button until appears next to Print Directory, and then press the Select button . The printer returns to Ready. Printing Confidential and Held Jobs The term held job refers to any type of print job that can be initiated by the user at the printer. This includes a confidential job, a verify print job, a reserve print job, a repeat print job, a bookmark, or a profile.
Printing and Deleting Held jobs Held jobs (Verify Print, Reserve Print, or Repeat Print) are printed or deleted from the printer operator panel and do not require a PIN number. Verify Print If you send a Verify Print job, the printer prints one copy and holds the remaining copies you requested in printer memory. Use Verify Print to examine the first copy to see if it is satisfactory before printing the remaining copies.
The job will print or be deleted according to the type of print job and action you selected. Printing on Specialty Media Media is paper, card stock, transparencies, labels,and envelopes. The last four are sometimes referred to as specialty media. Follow these instructions to print on specialty media. 1. Load the media as specified for the tray being used. See Loading Standard Trays and Optional Trays for help. 2.
NOTE: Do not remove a tray when a job is printing or when the operator panel indicator light is blinking. Doing so may cause a jam. 2. Squeeze the side guide tab, and slide the guide to the outer edge of the tray. 3. Squeeze the rear guide tab, and slide the guide to the correct position for the size media you are loading. 4. Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 5.
NOTE: Do not fill paper above the load line. Overfilling the tray may cause jams. 6. Squeeze the side guide tab, and slide the guide toward the inside of the tray until it lightly rests against the edge of the media. 7. Insert the tray into the printer. Setting the Paper Type and Paper Size After setting the Paper Type and Paper Size to the correct values for the type and size used in the trays, then any trays containing the same size and type are automatically linked by the printer.
This saves this setting as the new user default, and the printer returns to Ready. Loading the Multipurpose Feeder The multipurpose feeder can hold several sizes and types of print media, such as transparencies, postcards, note cards, and envelopes. It can be used for single-page or manual printing or as an additional tray. NOTE: If you install an optional envelope feeder, you can still use the multipurpose feeder.
3. Slide the width guide to the far right. 4. Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. NOTE: Hold transparencies by the edges and avoid touching the print side. Fan the stack of transparencies to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies. Paper Transparencies Envelopes 5. Load the media in the tray.
Loading paper, transparencies, or envelopes l Load paper or transparencies with the left edge of the stack against the stack height label and with the recommended print side face-up. l Load envelopes flap side down with the stamp area and flap on the left. The end of the envelope with the stamp area enters the multipurpose feeder first. l Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer.
Closing the Multipurpose Feeder 1. Remove print media from the multipurpose feeder. 2. Push the extension tray in. 3. Close the multipurpose feeder Loading the Envelope Feeder The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted correctly to ensure trouble-free printing. To load the envelope feeder: 1. Adjust the envelope support for the length of envelope you are loading.
2. Lift the envelope weight back toward the printer. It stays in place. 3. Slide the width guide to the far right. 4. Flex a stack of envelopes back and forth, and then straighten the edges on a level surface. Press down the corners to flatten them. Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly. 5. Load the stack of envelopes flap side down with the stamp area and the flap on the left.
6. Slide the width guide to the left until it lightly touches the stack. Make sure the envelopes do not buckle. 7. Lower the envelope weight to touch the stack. 8. Set the Paper Size and Paper Type for the envelope feeder (envelope Feeder Size and envelope Feeder Type) to the correct value for the print media you loaded. a. Press the Menu button on the operator panel. b. Press the Down arrow button until appears next to Paper Menu, and then press the Select button c.
For example, if you have the same size and type of print media loaded in tray 2 and tray 4, the printer selects print media from tray 2 until it becomes empty, and then the printer automatically feeds print media from the next linked tray — tray 4. By linking all trays (standard and optional), you effectively create a single source with a capacity of up to 2,600 sheets. Make sure you load the same size and type of print media in each tray in order to link the trays.
Linking output bins Linking output bins lets you create a single output source so the printer can automatically switch output to the next available bin. You can also set the output type for media such as card stock or envelope sizes that cannot be sent to an optional output bin. For more information on the values available to configure your output bins, see Understanding the Operator Panel Menus.
Regulatory Notices FCC Notices (U.S.
FCC Notices (U.S. Only) Most Dell devices are classified by the Federal Communications Commission (FCC) as Class B digital devices. To determine which classification applies to your device, examine all FCC registration labels located on the bottom, side, or back panel of your device, on card-mounting brackets, and on the cards themselves. If any one of the labels carries a Class A rating, your entire device is considered to be a Class A digital device.
CE Notice (European Union) Marking by the symbol indicates compliance of this Dell device to the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC of the European Union. Such marking is indicative that this Dell device meets the following technical standards: l EN 55022 — "Information Technology Equipment — Radio Disturbance Characteristics — Limits and Methods of Measurement." l EN 55024 — "Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement.
Simplified Chinese Class A Warning Notice (China Only) On Class A systems, the following warning will appear near the regulatory label: Warning: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
If the regulatory label includes the following marking, your device is a Class A product: Class B ITE This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
If you find a or mark on the regulatory label on the bottom, side, or back panel of your device, the following section is applicable: NOM Information (Mexico Only) The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM): Exporter: Dell Inc. One Dell Way Round Rock, TX 78682 Importer: Dell Computer de México, S.A. de C.V. Paseo de la Reforma 2620 - 11° Piso Col. Lomas Altas 11950 México, D.F.
The EPA's ENERGY STAR® program is a joint effort between the EPA and manufacturers to reduce air pollution by promoting energy-efficient products. You can help reduce electricity usage and its side effects by turning off your product when it is not in use for extended periods of time, particularly at night and on weekends. Waste Electrical and Electronic Equipment (WEEE) Directive In the European Union, this label indicates that this product should not be disposed of with household waste.
Euroopan unionissa tämä merkintä kertoo, että tuote tulee hävittää kotitalousjätteen mukana.. Se tulee hävittää niin, että se voidaan noutaa ja siirtää kierrätykseen. Lisätietoja tämän tuotteen kierrättämisestä maassasi on osoitteessa www.euro.dell.com/recycling. Directive WEEE (Waste from Electrical and Electronic Equipment, Déchets des équipements électroniques et électriques) Dans l'Union européenne, cette étiquette indique que ce produit ne doit pas être mis au rebut avec les déchets ménagers.
I EU betyr denne etiketten at dette produktet ikke skal kastes sammen med husholdningsavfall. Det bør leveres til et godkjent avfallsanlegg, slik at det kan gjenopprettes og resirkuleres. Hvis du vil ha informasjon om hvordan du kan resirkulere dette produktet på riktig måte i ditt land, kan du gå til: www.euro.dell.com/recycling. Dyrektywa WEEE dotycząca zużytego sprzętu elektrycznego i elektronicznego W Unii Europejskiej etykieta ta oznacza, że produktu nie należy wyrzucać wraz z domowymi odpadkami.
En la Unión Europea, esta etiqueta indica que este producto no se debe desechar con la basura doméstica, sino que se debe depositar en un lugar adecuado para permitir su recuperación y reciclaje. Para obtener información sobre cómo reciclar este producto de forma responsable en su país, visite: www.euro.dell.com/recycling. WEEE-direktivet (Waste from Electrical and Electronic Equipment) Inom EU indikerar den här etiketten att produkten får inte slängas med hushållsavfall.
Software Overview Dell™ Toner Management System Set IP Address Utility Dell Printer Software Uninstall Driver Profiler Dell Printer Configuration Web Tool Use the Drivers and Utilities CD that came with your printer to install a combination of software applications, depending on your operating system. NOTE: These software applications are not available with Linux or Macintosh.
NOTE: This application is not available when the printer is connected locally to a computer. The Set IP Address Utility lets you set up an IP address and other important IP parameters. To set the IP Address manually: 1. Launch the Dell Printer Configuration Web Tool by typing your network printer's IP address in your Web browser. 2. Click Printer Settings. 3. Under Printer Server Settings, click TCP/IP. 4. Enter the IP Address as well as the Netmask and Gateway settings.
If you fill out printer inventory reports requiring the asset tag number of all of the printers in your area, the Dell Printer Configuration Web Tool has a Printer Information feature that makes it easy. Just type the IP address of each printer on the network to display the asset tag number. The Dell Printer Configuration Web Tool feature also lets you change printer settings and keep track of printing trends.
Printer Information Get the information you need for service calls, inventory reports, or the status of current memory and engine code levels. Email Alert Setup Receive an email when the printer needs supplies or intervention. Type your name or the key operator's name in the email list box to be notified. Set Password Lock the operator panel with a password so that other users don't inadvertently change the printer settings you selected. NOTE: You must be a network administrator to use this feature.
Troubleshooting Understanding Printer Messages Checking an Unresponsive Printer Solving Printing Problems Solving Option Problems Solving Paper Feed Problems Solving Print Quality Problems Understanding Printer Messages The printer displays three types of messages: status messages, attendance messages, and service messages. Status messages provide information about the current state of the printer. They require no action on your part.
l You are using the wrong printer driver or are printing to a file. ¡ Verify you are using the printer driver associated with the printer. ¡ If you are using a USB port, make sure you are running Windows XP Professional x64, Windows XP, Windows Server 2003, Windows 2000, or Windows 98/Me and using a Windows XP, Windows Server 2003, Windows 2000, or Windows 98/Me compatible printer driver. Your print server is not set up properly or is not connected properly.
Solving Option Problems If an option does not operate correctly after it is installed or if it quits working: l Turn the printer off, wait for about 10 seconds, and turn the printer on. If this does not fix the problem, unplug the printer, and check the connection between the option and printer. l Print the menu settings page, and check to see if the option is listed in the Installed Options list. If the option is not listed, reinstall it. See Printing the Menu Settings Page for more information.
l The pick rolls may be worn. Replace the pick rolls. See Replacing the Pick Rollers for more information. The Paper Jam message remains after you remove the jammed paper. You have not pressed Go or have not cleared the entire paper path. Clear paper from the entire paper path, and then press the Select button . See Clearing Jams for more information. The page that jammed does not reprint after you clear the jam. Jam Recovery in the Setup menu is set to Off. Set Jam Recovery to Auto or On.
l l Enable Enhance Fine Lines. If you are using downloaded fonts, verify the fonts are supported by the printer, the host computer, and the software application. Part or all of the page is printed in black. Check the print cartridge to see if it is installed correctly. The job prints, but the top and side margins are incorrect. l l Make sure the Paper Size setting in the Paper menu is correct. Make sure the margins are set correctly in your software application. Ghost images appear.
Installing the Optional Wireless Card Minimum Requirements for Setup Wireless Network Settings Installing the Optional Wireless Card Configuring the Optional Wireless Card (Windows) Configuring the Optional Wireless Card (Macintosh) NOTE: The Optional Wireless Card may not be available in all regions. Check with your local Dell Sales Representative to determine availability.
To install the wireless card: 1. Open the side door. NOTICE: Option cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch an option card. 2. Locate the card connector on the system board. 3. Remove the screw and the cover plate, and save them. 4. Unpack the card. Save the packaging materials. 5. Align the connection points on the card with the connector on the system board, and push the card firmly into the system board connector. 6.
8. Attach the antenna to the option card. Make sure to tighten the connector until the antenna is attached securely, as a loose connection can result in a poor wireless signal. 9. Rotate the antenna until the joint allows it to be pointed up. 10. Close the side door. 11. Connect the power cord, and turn on the printer. Downloaded from ManualsPrinter.
Configuring the Optional Wireless Card (Windows) Configuration Overview After the internal wireless print server has been installed in a printer, there are two ways the print server can be configured for use on a wireless network: Configuring the print server using the Wireless Setup Utility, or by manual configuration.
1. Select the appropriate Network Name (SSID). Wireless Configurations Found on Your Computer l If existing wireless configurations are found on the computer, select the appropriate Network Name (SSID) from the list, click Next, and go to step 2. l If the correct network name is not in the list, select I want to enter a different configuration, click Next, and go to Wireless Networks Available in Your Area.
Advanced Mode The Advanced Mode home screen provides additional options for using the Wireless Setup Utility. Clicking Wizard Mode will revert the Wireless Setup Utility to Wizard Mode. Clicking Options provides the following management options: l Select either Wizard Mode or Advanced Mode as the default startup mode for the Utility. l Select the Do not verify the print server can join the network check box to bypass the wireless communication verification process.
b. Confirm the password. c. Click Install CA Certificate. d. e. l Click OK to return to the Advanced Mode home screen, and continue with step 6 of the advanced mode instructions. If EAP-TLS is selected as the authentication mechanism: a. Enter an appropriate username for the 802.1x — RADIUS authentication server. b. Click Install Signed Certificate. c. d. e. f. l Enter the path to the correct CA certificate, or click Browse to select the certificate.
The easiest way to change settings in the wireless print server is through the embedded Web server. For this to work, the printer must be successfully installed on the network. 1. Enter the IP address of the printer in a browser window. The embedded Web page for the print server appears. To locate the IP address of the printer, print a network setup page. a. Make sure the printer is on. b. Press the Menu button c.
Device IP address Computer 169.254.10.40 Print server 169.254.10.41 If the computer IP address is not within the same range as the print server, the IP address will need to changed so that it is within the appropriate range. For information on locating and changing the computer IP address, see the computer or operating system documentation. 6. Open a Web browser, and enter the print server IP address as the URL to access the embedded Web page of the print server. NOTE: If 802.
The option to set the Network Name (SSID) and Network Mode (Ad-Hoc or Infrastructure) using the printer operator panel is available for certain printer models. See your printer documentation for information on navigating the printer menus to help locate the appropriate menu option. Menu names pertaining to wireless settings may vary between different printer models.
6. Once the print server internal Web page loads, in the left-hand column, click Configuration. 7. Under Other Settings, click Network/Ports. 8. Under Network/Ports, click Wireless. 9. Change the listed network settings for the wireless print server to match your wireless network, including: l SSID l BSS type l Channel Number (for Ad-Hoc networks only) l Wireless Security Mode l Authentication Mode (If applicable) The SSID must be entered exactly as it is used on your network.
Once the print server has been configured, insert the Drivers and Utilities CD. Click Network Installation — Install the printer for use on a network. For more information, see Installing Drivers for Network Printing. Installing your network printer on additional network computers If you are installing the network printer for use with multiple computers on the network, repeat the Installing the Printer on the Network process for each computer that will have access to the printer.
Regulatory Notices for Wireless Option Operational Information Wireless interoperability The Dell 5210 / 5310 Wireless Option is designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) radio technology and orthogonal frequency division multiplexing (OFDM) and to comply with the following standards: l IEEE 802.11b-1999 Standard on 2.4 GHz Wireless LAN l IEEE 802.11g Standard on 2.
High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with this device, or can cause damage to this device, or both. Interference Statement These devices comply with Part 15 of the FCC Rules. Operation of the devices is subject to the following two conditions: (1) The devices may not cause harmful interference, and (2) The devices must accept any interference that may cause undesired operation.
Dell Inc déclare que l'option Sans fil Dell 5210 / 5310 décrite dans ce manuel d'utilisation répond aux principales exigences et aux autres dispositions respectives de la Directive européenne 1999/5/CE. Hiermit erklärt Dell Inc, dass die Dell 5210/5310-WLAN-Optionskarte den grundlegenden Anforderungen und anderen relevanten Vorschriften der Richtlinie 1999/5/EG entspricht.
It is important to ensure that you only use your radio device in countries where the device is approved for use. To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed on the radio approval list posted on the general Dell support site at http://support.dell.com.
