Owner`s manual

Installing and Removing Options

Order of Installation
Installing a 250-Sheet or 500-Sheet Drawer
Installing a Duplex Unit
Installing an Output Expander
Installing an Envelope Feeder
Installing Printer Memory
Installing Font ROMs
Order of Installation

Floor-mounted configurations require additional furniture. You must use either a printer stand or printer base if you are using more than one input option or a
duplex unit and an input option.

Install the printer and any options you have purchased in the following order:

l Printer stand or printer base

l 250-sheet or 500-sheet drawer

l Duplex unit

l Printer


For information on installing a printer stand or printer base, see the instructions included with the option.
Installing a 250-Sheet or 500-Sheet Drawer

Optional drawers attach under the printer and optional duplex unit. A drawer consists of a tray and a support unit. The 250-sheet drawer and the 500-sheet
drawer are installed the same way.
1. Remove the tray from the support unit. Remove all packing material and tape from both the support unit and the tray.
NOTE: Furniture options may not be available in all regions. Contact your Dell Sales Representative to determine furniture availability.
CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord before continuing.
NOTE: You can install up to four optional paper trays, or three trays and a duplex unit.
CAUTION: The printer requires two people to lift it safely.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if
you are using more than one input option or a duplex unit and an input option.
NOTE: You can install up to four optional paper trays, or three trays and a duplex unit.
Downloaded from ManualsPrinter.com Manuals