User Manual
Table Of Contents
- Dell EMC PowerEdge T40 Installation and Service Manual
- Contents
- About this document
- PowerEdge T40 system overview
- Initial system setup and configuration
- Pre-operating system management applications
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- System cover
- Front bezel
- Hard drives
- PSU assembly
- Power supply unit
- Expansion cards
- Memory module
- System battery
- Optical drive
- Speaker
- System fan
- Intrusion switch
- Processor and heatsink
- System board
- Control panel
- Power button module
- Jumpers and connectors
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- Supported operating systems
- PSU specifications
- System fan specifications
- System battery specifications
- Expansion card specifications
- Memory specifications
- Storage controller specifications
- Drive specifications
- Ports and connectors specifications
- Video specifications
- Environmental specifications
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 5. Security (continued)
Option Description
● Attestation Enable (Default setting)
● Key Storage Enable (Default setting)
● SHA-256 (Default setting)
Choose any one option:
● Disabled
● Enabled (Default setting)
Chassis Intrusion This field controls the chassis intrusion feature.
Choose any one of the option:
● Disabled
● Enabled (Default setting)
● On-Silent
OROM Keyboard Access
● Disabled
● Enabled (Default setting)
● One Time Enable
Admin Setup Lockout Allows you to prevent users from entering Setup when Admin password is set (Default
setting: not enabled).
Master Password Lockout Allows you to prevent users from entering Setup when Master password is set (Default
setting: not enabled).
SMM Security Mitigation Allows you to enable or disable additional UEFI SMM Security Mitigation protections (Default
setting: not enabled).
Table 6. Secure Boot
Option Description
Secure Boot Enable The option is not enabled by Default setting.
Secure Boot Mode
● Deployed Mode (Default setting)
● Audit Mode
Expert Key Management Allows you to enable or disable Custom Mode Key Management.
● Enable Custom Mode (This option is not enabled by Default setting)
If Enabled,
● PK (Default setting)
● KEK
● db
● dbx
Table 7. Intel Software Guard Extensions
Option Description
Intel SGX Enable Allows you to enable or disable Intel Software Guard Extensions.
● Disabled
● Enabled
● Software controlled (Default setting)
Enclave Memory Size Allows you to change the Intel Software Guard Extensions Enclave Reserve Memory size.
● 32 MB
● 64 MB
● 128 MB
Pre-operating system management applications 21