User guide

368 Dell PowerConnect 55xx Systems User Guide

Enter the fields:

–

Identify Unit ID

—Select a unit. This unit’s Location and Power LED

start blinking. Select

All

to cause the Location LEDs in all the units in

the stack to light up.

–

Identification Duration

(2-60)

—Enter a time interval. The Location

and Power LED light up for this period of time.

Setting the Location LED Using the CLI

The following table summarizes the CLI commands for setting the Location

LED:

The following is an example of the CLI command:

Table 9-72. Location LED CLI Commands

CLI Command Description

system light [unit unit-

number] [duration seconds]

system light stop

Lights the location LED on a spe-

cific unit.

Use the no form of this command to

turn off the light.

console# system light unit 1