User guide

410 Dell PowerConnect 55xx Systems User Guide
The following is an example of the CLI commands:
show ports storm-control port Displays the storm control
configuration.
console(config)# interface gi1/0/1
console(config-if)# storm-control broadcast enable
console(config-if)# storm-control include-multicast
unknown-unicast
console# show ports storm-control gi1/0/1
Port State Rate [Kbits/Sec] Included
-------- -------- ---------------- ---------------------
gi1/0/1 Disabled 8500 Broadcast
Table 10-10. Storm Control CLI Commands (Continued)
CLI Command Description