User guide

458 Dell PowerConnect 55xx Systems User Guide
Defining MSTP Interfaces Using CLI Commands
The following table summarizes the CLI commands for defining MSTP
interfaces as displayed in the MSTP Interfaces pages.
The following is an example of the CLI commands:
Table 13-7. MSTP Interface CLI Commands
CLI Command Description
spanning-tree mst
instance-id cost cost
no spanning-tree mst
instance-id cost
Sets the path cost of the port for MST
calculations (in Interface Configuration
mode).
Use the no form of this command to restore
the default configuration.
spanning-tree mst
instance-id port-
priority priority
Configures the device priority for the specified
spanning-tree instance (in Interface
Configuration mode).
Use the no form of this command to restore
the default configuration.
show spanning-tree mst-
configuration
Displays the MST configuration.
console(config)# interface gi1/0/9
console(config-if)# spanning-tree mst 1 cost 4