Installation Guide

www.dell.com | support.dell.com
8 Installing and Configuring the Mini PCI Card
10 Align the Mini PCI card with the connector at a
45-degree angle, and press the Mini PCI card into
the connector until you feel a click.
11 Connect the antenna cables to the Mini PCI card.
12 Replace the cover and tighten the screw.
Attaching the Regulatory Label
NOTICE: You must affix the provided label because it is
a regulatory requirement. Failure to do so may void your
authority to operate the equipment.
NOTE: If your kit came with a SIRIM label, attach the
label as shown
.
1 Close the display and turn the computer upside
down on a clean, flat work surface.