Installation Guide

www.dell.com | support.dell.com

10 Installing and Configuring the Mini PCI Card

3 If the computer is connected to a docking device

(docked), undock it. See the documentation that

came with your docking device for instructions.

4 Disconnect the computer from the electrical

outlet.

5 Wait 10 to 20 seconds, and then disconnect any

attached devices.

6 Remove any installed PC Cards, batteries, and

module bay devices.

NOTICE: Handle components and cards by their edges,

and avoid touching pins and contacts. Ground yourself by

touching a metal connector on the back of the computer.

Continue to ground yourself periodically during this

procedure.

Turn the computer over.

8 Loosen the captive screw from the Mini PCI

card/modem cover, and remove the cover.