Installation Guide

www.dell.com | support.dell.com
Installing and Configuring the Mini PCI Card 11
9 If a Mini PCI card is not already installed, go to
step 10. If you are replacing a Mini PCI card,
remove the existing card:
a Disconnect the Mini PCI card from any
attached cables.
b Release the Mini PCI card by spreading the
metal securing tabs until the card pops up
slightly.
c Lift the Mini PCI card out of its connector.
NOTICE: To avoid damaging the Mini PCI card, never
place cables on top of or under the card.
NOTICE: The connectors are keyed to ensure correct
insertion. If you feel resistance, check the connectors and
realign the card.
Mini PCI card
antenna
cables (2)