User's Guide

5. Connect the antenna cables from the Mini PCI card to the antenna connectors on the computer.

6. Lower the Mini PCI card toward the inner tabs to approximately a 20-degree angle.

7. Continue lowering the Mini PCI card until it snaps into the inner tabs of the connector.

8. Replace the cover.

Hard Drive

1. Turn the computer over. Use a small screwdriver to loosen the captive hard drive screw.

NOTICE: The connectors are keyed for correct insertion; do not force the connections.

1 antenna connectors on card (2)

2 antenna cables (2)

NOTICE: To prevent data loss, shut down your computer before removing the hard drive. Do not

remove the hard drive while the computer is on, in standby mode, or in hibernate mode.

NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.

CAUTION: If you remove the hard drive from the computer when the drive is hot, do not

touch the metal housing of the hard drive.

CAUTION: Before working inside your computer, read the safety instructions in your System

Information Guide.

NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than

Dell.

e 10 of 17Addin

and Re

lacin

Parts

1/13/2004file://C:\Documents%20and%20Settin

s\msclark1\Local%20Settin

s\Tem

\~hh93B0.htm