User's Guide

Cleaning Your Computer
Computer and Keyboard
Display
Touch Pad
Floppy Drive
Optical Media
Computer and Keyboard
1. Shut down your computer, disconnect any attached devices, and disconnect them from their electrical
outlets.
2. Remove any
installed batteries.
3. Gently use a vacuum cleaner with a brush attachment to remove dust from the slots and holes on your
computer and between the keys on the keyboard.
4. Moisten a soft, lint-free cloth with water or an LCD cleaner, and wipe the computer and keyboard. Do
not allow water from the cloth to seep between the touch pad and the surrounding palm rest.
Display
1. Shut down your computer, disconnect any attached devices, and disconnect them from their electrical
outlets.
2. Remove any
installed batteries.
3. Moisten a soft, lint-free cloth with water or an LCD cleaner, and wipe the display until it is clean.
NOTICE: To avoid damaging the computer or display, do not spray cleaning solution directly onto the
display. Only use products specifically designed for cleaning LCDs, and follow the instructions that are
included with the product.
NOTICE: To avoid damaging the computer or display, do not spray cleaning solution directly onto the
display. Only use products specifically designed for cleaning LCDs, and follow the instructions that are
included with the product.
Pa
g
e 1 of 3Cleanin
g
Your Com
p
ute
r
1/13/2004file://C:\Documents%20and%20Settin
g
s\msclark1\Local%20Settin
g
s\Tem
p
\~hh4ECE.htm