User Manual
22 Driver Installation
Updating the Windows Driver
To update the Windows driver for the 6 Gbps SAS HBA or Internal Tape
Adapter card that is already installed on your system, follow the steps given
below:
NOTE: It is important that you close all applications on your system before
you update the driver.
1
Depending upon your operating system, choose the appropriate action
from the following list:
•
For Windows Server 2003
:
Click
Start
Settings
Control Panel
System
.
•
For Windows Server 2008
:
Click
Start
Settings
Control Panel
System
.
•
For Windows Server 2008 R2
:
Click
Start
Control Panel
System and Security
System
The
System Properties
screen is displayed.
2
Depending upon your operating system, choose the appropriate action
from the following list:
• For Windows Server 2003:
Click the
Hardware
tab.
• For Windows Server 2008:
Click
Device Manager
.
• Windows Server 2008 R2:
Click
Device Manager
.
The
Device Manager
screen is displayed.
NOTE: Alternatively open Device Manager. In Windows Explorer, right-click
on My Computer and select Manage. The Computer Management screen is
displayed. Select Device Manager in the left panel.
3
Double-click on
SCSI and RAID Controllers
.
NOTE: In Windows 2008, SAS is listed under Storage Controllers.
4
Double-click the controller for which you want to update the driver.
5
Click the
Driver
tab and click
Update Driver
.
The
Upgrade Device Driver
Wizard
screen is displayed.