User Manual

30 Troubleshooting
• Message : Error obtaining PHY properties
configuration information.
Description : Fails to read vital configuration page from firmware.
Suggested Solution : Reflash the firmware and reboot.
• Message: Configuration Utility Options Image
checksum error.
Description : Fails to read Configuration Utility options from flash.
Suggested Solution : Restart and retry. If the issue persists, reflash the
firmware on the controller.
• Message: Can't load default Configuration
Utility options.
Description : Memory allocation for Configuration Utility options
structure fails.
•
Message : An error occurred while writing
non-volatile settings.
Description : An error occurs while writing one or more settings to the
firmware.