Service Manual
Table Of Contents
- XPS 13 Plus 9320 / XPS 9320 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- System setup
- Troubleshooting
- Handling swollen Lithium-ion batteries
- Locate the Service Tag or Express Service Code of your Dell computer
- System diagnostic lights
- SupportAssist diagnostics
- Built-in self-test (BIST)
- Recovering the operating system
- WiFi power cycle
- Drain residual flea power (perform hard reset)
- Backup media and recovery options
- Real Time Clock—RTC reset
- Getting help and contacting Dell
Table 5. System setup options—Integrated Devices menu (continued)
Integrated Devices
Enable Thunderbolt™ Technology
Support
Enable Thunderbolt™ Technology Support Enables or disables Thunderbolt™ Technology support.
Default: ON
Enable Thunderbolt™ Boot Support
Enable Thunderbolt™ Boot Support Enables or disables Thunderbolt™ Boot Support.
Default: OFF
Enable Thunderbolt™ (and PCIe behind
TBT) pre-boot modules
Enable Thunderbolt™ (and PCIe behind
TBT) pre-boot modules
Enables or disables to allow or disallow PCIe devices to be connected through a
Thunderbolt™ adapter during pre-boot.
Default: OFF
Disable USB4 PCIE Tunneling Disables USB4 PCIE Tunneling.
Default: OFF
Video/Power only on Type-C Ports Limits Type-C port functionality to video or power only.
Default: OFF
Type-C Dock
Type-C Dock Override Allows user to use connected Type-C Dell docking station to provide data stream
while the external USB ports are disabled.
Default: ON
Type-C Dock Audio Allows user to have audio inputs and outputs from the connected Type-C Dell
docking station.
Default: ON
Type-C Dock LAN Enable or disable the LAN on the external ports of the connected Type-C Dell
docking station.
Default: ON
Miscellaneous Devices
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
By default, Enable Fingerprint Reader Device is selected.
Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Configures operating mode of the integrated SATA hard drive controller.
Default: AHCI/NVMe. Storage device is configured for AHCI/NVMe mode.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD.
Default: ON
Drive Information Displays the information of onboard drives.
52 System setup