User Manual

Media-card reader
The following table lists the media cards supported by your OptiPlex 5000 Small Form Factor.
Table 14. Media-card reader specifications
Description Values
Media-card type
One SD-card 4.0 slot
Media-cards supported
● Secure Digital (mSD)
● Secure Digital High Capacity(mSDHC)
● Secure Digital Extended Capacity(mSDXC)
NOTE: The maximum capacity supported by the media-card reader varies depending on the standard of the media card
installed in your computer.
Power ratings
The following table lists the power rating specifications of OptiPlex 5000 Small Form Factor.
Table 15. Power ratings
Description Option one Option two Option three
Type
240 W (85% Efficient, 80
PLUS Bronze)
260 W (85% Efficient, 80
PLUS Bronze)
300 W (92% Efficient, 80 Plus
Platinum)
Input voltage
90 VAC-264 VAC 90 VAC-264 VAC 90 VAC-264 VAC
Input frequency
47 Hz-63 Hz 47 Hz-63 Hz 47 Hz-63 Hz
Input current (maximum)
4 A 4.2 A 4.2 A
Output current (continuous)
● 12 VA/18 A
● 12 VB/15 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/2.5 A
● 12 VA/18 A
● 12 VB/16 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VA/18 A
● 12 VB/18 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
Rated output voltage
● +12 VA
● +12 VB
● +12 VA
● +12 VB
● +12 VA
● +12 VB
Temperature range:
Operating
5°C to 45°C (41°F to 113°F) 5°C to 45°C (41°F to 113°F) 5°C to 45°C (41°F to 113°F)
Storage
-40°C to 70°C (-40°F to
158°F)
-40°C to 70°C (-40°F to
158°F)
-40°C to 70°C (-40°F to
158°F)
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex 5000 Small Form Factor.
Table 16. Power supply connector
240 W (80 PLUS Bronze)
● Two 4 pin connectors for processor
● One 8 pin connector for system board
18 Specifications of OptiPlex 5000 Small Form Factor