Service Manual
Table Of Contents
- Vostro 15 5510 Service Manual
- Working on your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of your system
- Base cover
- Battery
- Battery cable
- Memory
- Solid-state drive—M.2 slot one
- Solid-state drive—M.2 slot two
- Wireless card
- Fan
- Coin-cell battery
- Heat sink
- Network-port bracket
- I/O board
- Speakers
- Touchpad
- Display assembly
- Power button with optional fingerprint reader
- Power-adapter port
- System board
- Palm-rest and keyboard assembly
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help
Table 8. System setup options—Storage menu
Storage
Storage Interface
Port Enablement Enables or disables onboard drives
Default: ON.
SMART Reporting
Enable SMART Reporting Enables or disables the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting
Technology) option on the system.
Default: OFF.
Drive Information
M.2 PCIe SSD-1 Provides information about the type and device on the computer.
Table 9. System setup options—Display menu
Storage
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
EcoPower Enables or disables EcoPower which increases the battery life by reducing the
screen brightness when appropriate.
Default: ON.
Full-Screen Logo Displays full screen logo if the image matches screen resolution.
Default: OFF.
Table 10. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Allows pre-OS and early OS networking features to use any enabled NICs.
Enabled with PXE: Default
Wireless Device Enable Enable or disable internal WLAN/Bluetooth devices.
WLAN
Default: ON.
Bluetooth
Default: ON.
Enable UEFI Network Stack Allows pre-OS and early OS networking features to use any enabled NICs. This
may be used without the PXE turned on.
Default: ON.
HTTP(s) Boot Feature
HTTP(s) Boot This platform has HTTP(s) Boot capabilities.
Default: ON.
NOTE: Provisioning of the Certificate is necessary to connect to HTTPs
Boot server.
Table 11. System setup options—Power Management menu
System setup 71