Service Manual
Table Of Contents
- Vostro 15 5510 Service Manual
- Working on your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of your system
- Base cover
- Battery
- Battery cable
- Memory
- Solid-state drive—M.2 slot one
- Solid-state drive—M.2 slot two
- Wireless card
- Fan
- Coin-cell battery
- Heat sink
- Network-port bracket
- I/O board
- Speakers
- Touchpad
- Display assembly
- Power button with optional fingerprint reader
- Power-adapter port
- System board
- Palm-rest and keyboard assembly
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help
Table 11. System setup options—Power Management menu
Power Management
Battery Configuration Enables the computer to run on battery during peak power usage hours. Use
the below options to prevent AC power usage between certain times of each
day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF.
Enable Peak Shift Enables the system to run on battery during peak power usage hours.
Default: OFF.
Thermal Management Allows for cooling fan and processor heat management to adjust system
performance, noise, and temperature.
Default: Optimized.
Enable USB Wake Support Enables the USB devices to wake the computer from Standby mode, Hibernate
and Power Off.
Default: OFF.
Enable on Dell USB-C Dock Enables the Dell USB-C Dock when connected to wake the computer from
Standby mode, Hibernate and Power Off.
Default: ON.
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF.
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Lid Switch
Enable Lid Switch Enables or disables lid switch.
Default: ON.
Power On Lid Open Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON.
Intel Speed Shift Technology Enables or disables Intel Speed Shift Technology support which enables
the operating system to select the appropriate processor performance
automatically.
Default: ON.
Table 12. System setup options—Security menu (continued)
Security
TPM 2.0 Security
TPM 2.0 Security On Enable or disable TPM 2.0 security options.
By default, the TPM 2.0 Security On option is enabled.
PPI Bypass for Enable Commands Allows the OS to skip BIOS PPI user prompts when issuing TPM PPI enable
and activate commands.
72 System setup