Manualshelf

Owner`s manual

ManualsBrandsDell ManualsDesktop7010
21222324252627282930
4. Use a Phillips screwdriver to loosen the captive screws in diagonal order and lift the heat sink away from the
computer.
Installing the Heat Sink
1. Place the heat sink into the chassis.
2. Use a Phillips screwdriver to tighten the captive screws in diagonal order to secure the heat sink to the system
board.
3. Connect the heat sink cable to the system board.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.
22