Manualshelf

Owner`s manual

ManualsBrandsDell ManualsDesktop7010
12345678910
Installing the Intrusion Switch
1. Insert the intrusion switch into its place in the chassis rear and slide it towards the top to secure it.
2. Connect the intrusion cable to the system board.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the cover.
3. Gently pry the front panel retention clips away from the chassis located at the edge of front panel.
9