Owner's Manual

4
6
7
8
9
Volume Control Allows you to increase or decrease the volume.
5 Up
/ Keystone Press to navigate through the On-Screen Display
adjustment (OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-30 degrees).
Right
/ Press to navigate through the On-Screen Display
Auto Adjust (OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
IR Receiver Point the remote control towards the IR receiver
and press a button.
Down
/ Keystone Press to navigate through the On-Screen Display
adjustment
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-30 degrees).
Menu
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
10 Left
/ Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
11 Enter
Press to confirm the selection item.
12 Brightness and Allows you to adjust the brightness and contrast
Contrast Control
values.
Using Your Projector 31