Owner's Manual

Using the On-Screen Display

• The projector has a multi-language On-Screen Display (OSD) Menu that can be

displayed with or without an input source.

• Press the Menu button on the control panel or the remote control to enter the

Main Menu.

• To navigate through the tabs in the Main Menu, press the

or buttons on

your projector’s control panel or remote control.

• To select a submenu, press the

or button on your projector’s control panel

or remote control.

• To select an option, press the

or buttons on your projector’s control panel

or remote control. When an item is selected, the color changes to dark blue.

• Use the

or buttons on the control panel or remote control to adjust the

settings.

• To go back to the Main Menu, press the

button on the control panel or the

remote control.

• To exit the OSD, press the

button directly on the control panel or the

remote control.

INPUT SOURCE

The Input Source menu allows you to select your projector’s input source.

AUTO SOURCE—Press to turn on or off Auto Source mode.

VGA-A—Press

to detect a VGA-A signal.

VGA-B—Press to detect a VGA-B signal.

HDMI-A—Press

to detect a HDMI-A signal.

HDMI-B—Press to detect a HDMI-B signal.

OMPONENT—Press to detect a RCA Component signal.

OMPOSITE—Press to detect a Composite Video signal.

S-V

IDEO—Press to detect a S-Video signal.

Using Your Projector 37