User Manual

Table 14. Media-card reader specifications (continued)
Description Values
NOTE: The maximum capacity supported by the media-card reader varies depending on the standard of the media card
installed in your computer.
Power ratings
The following table lists the power rating specifications of OptiPlex 7000 Tower.
Table 15. Power ratings
Description Option one Option two Option three Option four
Type
240 W internal power
supply unit (PSU), 85%
Efficient, 80 Plus Bronze
260 W internal power
supply unit (PSU), 85%
Efficient, 80 Plus Bronze
400 W internal power
supply unit (PSU),
92% Efficient, 80 Plus
Platinum
500 W internal
power supply
unit (PSU), 92%
Efficient, 80 Plus
Platinum
Input voltage
90 VAC–264 VAC 90 VAC–264 VAC 90 VAC–264 VAC 90 VAC–264 VAC
Input frequency
47 Hz-63 Hz 47 Hz-63 Hz 47 Hz-63 Hz 47 Hz-63 Hz
Input current
(maximum)
4.0 A 4.2 A 5.4 A 7 A
Output current
(continuous)
● 12 VA/18 A
● 12 VB/15 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VA/18 A
● 12 VB/16 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VA/18 A
● 12 VB/18 A
● 12 VC/12 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VC/0 A
● 12 VA/18 A
● 12 VB/18 A
● 12 VC/18 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VC/0 A
Rated output voltage
● +12 VA
● +12 VB
● +12 VA
● +12 VB
● +12 VA
● +12 VB
● +12 VC
● +12 VA
● +12 VB
● +12 VC
Temperature range:
Operating
5°C-45°C (41°F-113°F) 5°C-45°C (41°F-113°F) 5°C-45°C (41°F-113°F) 5°C-45°C
(41°F-113°F)
Storage
-40°C-70°C
(-40°F-158°F)
-40°C-70°C
(-40°F-158°F)
-40°C-70°C
(-40°F-158°F)
-40°C-70°C
(-40°F-158°F)
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex 7000 Tower.
Table 16. Power supply connector
240 W (80 PLUS Bronze)
● Two 4 pin connectors for processor
● One 8 pin connector for system board
260 W (80 PLUS Bronze)
● Two 4 pin connectors for processor
● One 8 pin connector for system board
Specifications of OptiPlex 7000 Tower 19