User Manual

Regulatory compliance
The following table lists the regulatory compliance of your OptiPlex 7000 Tower.
Table 23. Regulatory compliance
Regulatory compliance
EPEAT registered configurations available
ENERGY STAR compliant configurations available
TCO 8.0 certified configurations available
US CEC MEPS compliant configurations available
Australia and New Zealand MEPS compliant configurations available
CEL
WEEE
Japan Energy Law
South Korea E-standby
EU RoHS
China RoHS
Operating and storage environment
This table lists the operating and storage specifications of your OptiPlex 7000 Tower.
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 24. Computer environment
Description Operating Storage
Temperature range
10°C-35°C (50°F-95°F) -40°C-65°C (-40°F-149°F)
Relative humidity (maximum)
20% to 80% (non-condensing) (non-
condensing, Max dew point temperature
= 26°C)
0% to 95% (non-condensing) 5% to
95% (non-condensing, Max dew point
temperature = 33°C)
Vibration (maximum)
*
0.26 GRMS random at 5 Hz-350 Hz 1.37 GRMS random at 5 Hz-350 Hz
Shock (maximum)
Bottom half-sine pulse with a change in
velocity of 50.8 cm/sec (20 in./sec)
105G half-sine pulse with a change in
velocity of 133 cm/sec (52.5 in./sec)
Altitude range
-15.2 m to 3048 m (4.64 ft to 10,000 ft) -15.2 m to 10,668 m (4.64 ft to 35,000
ft)
CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing
the device outside these ranges may impact the performance of specific components.
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse.
Specifications of OptiPlex 7000 Tower
23