Specifications

A Principled Technologies test report 14
Dell Active System 800 converged infrastructure solution: User
collaboration performance
Adding the second Dell EqualLogic PS6110XV storage array
Connect to the storage array using serial port and terminal utility and complete the following steps:
1. Enter the login credentials.
2. When prompted to configure the array, type y.
3. When asked Do you want to proceed?, type Yes .
4. Enter a member name and press Enter. For our testing we chose tray2.
5. Press Enter for the eth0 network interface.
6. Enter an IP address, and press Enter. For our testing, we chose 192.10.11.22
7. Leave the default netmask, and press Enter.
8. Leave the default gateway, and press Enter.
9. For group name, enter the name of the existing group you created when you configured the first PS6110XV
storage array. For our testing, this was group.
10. Verify that the group IP address is correct, and press Enter.
11. Enter the password for the group manager, and press Enter.
12. When asked to add the array to the group, type yes.
13. Open a web browser using a machine on the storage network and enter the group IP address.
14. Provide the appropriate login credentials when prompted.
15. Select the un-configured member in the group, and click Yes to configure it.
16. At the General Settings screen, click Next.
17. Select the RAID policy, and click Next. For our testing, we selected RAID 10.
18. At the Summary screen, click Finish.