Specifications

A Principled Technologies test report 16
Dell Active System 800 converged infrastructure solution: User
collaboration performance
6. Type no shut and press Enter.
7. Type exit and press Enter.
Configuring login credentials
1. Type username admin privilege 15 password 0 password and press Enter, where password
is the password you wish to set.
2. Type enable password level 15 0 password and press Enter.
Configuring the remaining ports
1. Type interface range tengigabitethernet 0/0 – 43 and press Enter.
2. Type mtu 12000 and press Enter.
3. Type portmode hybrid and press Enter.
4. Type switchport and press Enter.
5. Type flowcontrol rx on tx on and press Enter.
6. Type no shut and press Enter.
7. Type exit and press Enter.
8. To save these settings, type copy run start and press Enter.
9. To apply these settings, type reload and press Enter. When asked if you want to proceed with the reload, type
yes and press Enter. After the switches reboot, the settings will have all taken effect.