User Manual

b Lift the metal bracket [2].

c Disconnect the WLAN cables from the connectors on the WLAN card [3].

d Remove the WLAN card from the system [4].

Installing WLAN card

1 Insert the WLAN card into the connector on the system board.

2 Connect the WLAN cables to the connectors on the WLAN card.

3 Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the WLAN card.

4 Install the following:

a battery

b base cover

5 Follow the procedure in After working inside your computer.

Memory modules

Removing memory module

1 Follow the procedure in Before working inside your computer.

2 Remove the following:

a base cover

b battery

3 To remove the memory module:

Removing and installing components