User Manual
Table Of Contents
- Dell Precision 5820 Tower Owner's Manual
- Working on your computer
- Removing and installing components
- Screw size list
- Recommended tools
- Side cover
- Power supply unit (PSU)
- Front bezel
- Hard Disk Drive bezel
- Hard disk drive assembly
- Slim Optical Disk Drive
- Front input and output bezel
- Optical Disk Drive
- 5.25 inch ODD bracket
- Front input and output panel
- Input and output panel bracket
- Intruder switch
- Internal chassis speaker
- Air shroud
- Memory
- Expansion card
- Coin cell battery
- System fan
- Fan bracket
- PCIe holder
- Heat sink and CPU fan assembly
- Processor
- Front system fan
- System board
- Technology and components
- System specifications
- System Setup
- Software
- Troubleshooting
- Contacting Dell
Installing the front bezel
1 Hold the bezel and ensure that the hooks on the bezel snap into the notches on the system.
2 Rotate the bezel forward and press the front bezel until the tabs click into place.
3 Follow the procedure in After working inside your computer.
Hard Disk Drive bezel
Removing HDD bezel
1 Follow the procedure in Before working inside your computer.
2 Remove the side cover.
3 To remove the HDD bezel:
a Press the blue unlock button [1] on the edge of ODD bay.
b Slide the latch [2] to the unlock position, on the front I/O bezel.
c Rotate forward and lift the HDD bezel [3] away from the system.
Removing and installing components
15