User Manual
Table Of Contents
- Dell Precision 5820 Tower Owner's Manual
- Working on your computer
- Removing and installing components
- Screw size list
- Recommended tools
- Side cover
- Power supply unit (PSU)
- Front bezel
- Hard Disk Drive bezel
- Hard disk drive assembly
- Slim Optical Disk Drive
- Front input and output bezel
- Optical Disk Drive
- 5.25 inch ODD bracket
- Front input and output panel
- Input and output panel bracket
- Intruder switch
- Internal chassis speaker
- Air shroud
- Memory
- Expansion card
- Coin cell battery
- System fan
- Fan bracket
- PCIe holder
- Heat sink and CPU fan assembly
- Processor
- Front system fan
- System board
- Technology and components
- System specifications
- System Setup
- Software
- Troubleshooting
- Contacting Dell
Installing front input and output bezel
1 Hold the input and output(I/O) bezel and ensure that the hooks on the bezel snap into the notches on the system.
2 Press the retention tabs and secure them to the chassis.
3 Install the :
a front bezel
b side cover
4 Follow the procedure in After working inside your computer.
Optical Disk Drive
Removing the ODD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b front bezel
3 To remove the ODD:
a Remove the optical drive data cable and optical drive power cable from the ODD.
24
Removing and installing components