Owner manual

system:restart
Restarts a designated node.
Syntax
system:restart [options]
Options
--wait or –w <integer> Maximum seconds to wait for the system to respond to the update
request. Use
--wait 0 to return immediately.
–-node or -n <address(es)>
Issue this command to one or more nodes in the cluster.
--cluster Issue this command to all nodes in the cluster.
(See
help –-all for details on all other options.)
Example
This restarts
node2 in the system:
> system:restart –-node node2
system:setup
Configures a selected aspect of the ION system by invoking the corresponding Setup dialog. This
temporarily exits the CLI and returns when the dialog is closed. For details on the dialogs and their
respective fields, refer to the ION Accelerator GUI Guide.
Before using this command, be sure you have put the affected nodes into maintenance mode
(see the system:maintenance
command).
Syntax
system:setup setup
Arguments
setup One of the following types of setup to perform:
lan – Invokes the LAN configuration screen
cluster – Invokes the Cluster Configuration screen
timezone – Invokes the Timezone screen
password – Invokes the Password Screen
resetios – Shuts down fio-agent and fio-msrv, resets the
110