Owner manual

TARGET: [tgt, tgt]
CNA: [QLogic Corporation-QLE2562-LFD1014B42206]
PORT: [21:00:00:24:ff:21:23:4c, 21:00:00:24:ff:21:23:4d]
INITIATOR_GROUP: [ini]
INITIATOR: [21:00:00:1b:32:8b:49:77, 21:01:00:1b:32:ab:49:77,
50:01:43:80:04:25:ce:6c]
SOFTWARE: SoftwareVersion [version=2.0.1, patchLevel="", hotfixId="",
releaseDate="Mon Dec 17 09:51:55 MST 2012", buildNumber=253, description="ION
Accelerator", updating=false, updateState=INITIAL, estimatedUpdateTimeMins=0,
rebootRequired=false]
SNMP: SNMPDetail [trapAddress=null, trapCommunity=null, serviceEnabled=true]
config:restore
Applies (restores) a configuration to the current node.
Syntax
config:restore [options] configuration
Options
--local Make changes only on the local node.
--dry-run Show what will be done, but don't do it.
--no-auto or -na Do not automatically repair configuration problems.
--from-node or –fn <names>
List of node identifiers to be changed
--to-node or –tn <names>
List of targets to change to
--from-target or –ft <names>
List of target identifiers to be changed
--to-target or -tt <names>
List of targets to change to
--input-last Load the last known configuration.
--input-file or -if <filename>
Use file input.
--input-pipe or -ip Use stdin as input to the command line (non-interactive only).
40