Owner manual

drive:get [options] id
Options
–-boot or -b Specify that the drive is a boot device.
–-rescan or -r Force rescan of boot devices.
–-node or -n <address(es)>
Issue this command to one or more nodes in the cluster.
--cluster Issue this command to all instances in the cluster.
(See
help –-all for details on all other options.)
Arguments
id The ID, UUID, or WWPN of the drive to get information for
Example
This gets information about the drive named
fioa (from drive:list):
> drive:get fioa
Id fioa
Capacity 1,205.00 GB
Device /dev/fioa
Slot 3
Adapter 1150D0032
Board Name ioDrive2 Adapter Controller
UUID 1150D0032-1121
Err/Warn []
FAN COMMANDS
The Fan commands get information about available fans.
Fan speed may be reported either as a percentage or in RPM. Check the units that apply to
your particular platform.
fans or fan:list
Lists the available fans.
Syntax
fan:list [options]
47