Owner manual

fan:get

Gets details about a fan.

Syntax

fan:get [options] id

Options

–-node or -n <address(es)>

Issue this command to one or more nodes in the cluster.

--cluster Issue this command to all instances in the cluster.

(See

help –-all for details on all other options.)

Arguments

id The ID, UUID, or WWPN of the fan to get information for

Example

This gets details about the fan with the ID

fan1.

> fan:get fan1

FIO COMMANDS

The fio commands provide information about the ioDrive devices used in the ION Accelerator

appliance. These commands are similar to the Command-Line Utilities available with the VSL

software.

fio:beacon

Enable or disable the beacon for an ioDrive attached to a device control node (using the --on or

--off options), or return its status (using neither --on nor --off).

Syntax

fio:beacon [options] device-node

Options

--on Enable the beacon.

--off Disable the beacon.