Owner manual

Example

This shows network address details:

> network:ping 192.168.20.49

PING 192.168.20.49 (192.168.20.49) 56(84) bytes of data.

64 bytes from 192.168.20.49: icmp_seq=1 ttl=64 time=0.031 ms

64 bytes from 192.168.20.49: icmp_seq=2 ttl=64 time=0.010 ms

64 bytes from 192.168.20.49: icmp_seq=3 ttl=64 time=0.017 ms

--- 192.168.20.49 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 1998ms

rtt min/avg/max/mdev = 0.010/0.019/0.031/0.009 ms

NODE COMMANDS

The Node commands enable you to list or get information for network nodes.

node:get

Retrieves detailed information on a node. If no node is specified, information about the current

local node is returned.

Syntax

node:get [options] id

Options

–-node or -n <address(es)>

Issue this command to one or more nodes in the cluster.

--cluster See –-urlList above.

(See

help –-all for details on all other options.)

Arguments

id The ID or UUID of the node to get information for

Example

This gets information on

ionr8i48:

> node:get ionr8i48

Id ionr8i48

UUID 16885952