Owner manual

Options
–-node or -n <address(es)>
Issue this command to one or more nodes in the cluster.
--cluster Issue this command to all nodes in the cluster.
(See
help –-all for details on all other options.)
Arguments
id The ID, UUID, or WWPN of the RAID to delete. This argument may be
used multiple times.
Example
This deletes the RAID array named
myRAID:
> raid:delete myRAID
raid:get
Gets details about a RAID, including capacity, chunk size, RAID device path, errors and warnings,
other device paths, spares and faults (if available), rebuild percent, RAID state and status, sync
status, and UUID.
Syntax
raid:get [options] id
Options
--boot or –b Include only boot devices.
--rescan
or –r Force rescan of boot devices.
–-node
or -n <address(es)>
Issue this command to one or more nodes in the cluster.
--cluster Issue this command to all nodes in the cluster.
(See
help –-all for details on all other options.)
Arguments
id The ID, UUID, or WWPN to get information for
Example
This gets information for the RAID array named
md0 (from raid:list):
87