Owner's Manual

Figure 14. AFC GUI — Topology Node Data
To view more information about a node or link, select a viewing mode from the drop-down Select View
list and click the Go button. The available viewing mode options vary depending on the type of node or
link. The following table lists the viewing options by type and a description for each type.
Table 48. — Topology Navigation
Item of Interest Available Viewing Options Description
Switch Topology Map Displays the selected switch and
all other devices (such as
switches and endpoints)
connected to the switch.
Switch Details Displays switch details such as
type, hardware description,
software description, and details
for links connecting the switch to
other devices.
Endpoint Topology Map Displays the selected endpoint
and all switches or devices
connected to the endpoint.
Endpoint Details Displays information about the
endpoint and all links connecting
the endpoint to other devices.
Originating Flows Displays details for all flows using
the selected endpoint as a
source.
Terminating Flows Displays details for all flows using
the selected endpoint as a
destination.
Switch-to-switch link Link Details Displays descriptions for devices
at either end of the selected link.
Endpoint-to-switch link Link Details Displays descriptions for devices
at either end of the selected link.
Counter Statistics
The software uses counters to produce statistics for a node or link. The list of available counters depends
on the type of node or link you select. To view statistics based on counter data, select a counter from the
Select Counter drop-down list and click the Go button. You can display the counter data in Chart or Tile
viewing modes. To reset the selected counter, click the Clear button.
Table 49. — Counter Statistics
Item of Interest Available Viewing Modes Description
Switch OpenFlow Counters Displays OF statistics (such as the
number of OF packets, active
82
Active Fabric Controller User Interface