Owner's Manual

Item of Interest Available Viewing Modes Description

flows, and flow mods) for the

selected switch in a Tile format.

Switch Counters Displays aggregate packet, byte,

and error counts for the selected

switch in a Tile format.

Port Counters Displays detailed packet and byte

counts for each port on the

selected switch as a Bar Chart

categorized by counter type.

Queue Counters Displays detailed packet and byte

counts for each priority queue for

each port on the selected switch

in a Bar Chart format.

Endpoint Originating Flow Counters Displays packet and byte

statistics for all flows originating

from the selected endpoint.

Terminating Flow Counters Displays packet and byte

statistics for all flows terminating

on the selected endpoint.

Flow Monitoring

To provide relevant statistics, the software can monitor specified flows. Flow monitoring is disabled by

default. To select the category of flows to monitor, use the drop-down Select Flow Monitoring list. The

options listed varies depending on the selected node or link. To begin flow monitoring for the selected

flows, click the Start button. To disable flow monitoring for the selected flows, click the Stop button.

Table 50. — Flow Monitoring

Item of Interest Available Viewing Modes Description

Endpoint Originating Flows Enable or disable monitoring for

all flows using the selected

endpoint as the source.

Terminating Flows Enable or disable monitoring for

all flows using the selected

endpoint as the destination.

Configuring Resources

Using the Configure Menu

If you hover over the Configure link in the banner, a drop-down menu displays. Click to select an option

and enter the required information in the form that displays. You can configure the following:

• Policies

• Policy Associations

• Fabric Edges

Active Fabric Controller User Interface