Owner's Manual

Figure 16. Configure Policy Window
2. Select a provider from the drop-down Provider ID: list.
3. If the policy is tenant-specific, check the Tenant Policy checkbox. If you do not check this
checkbox, the policy is provider-specific.
4. If applicable, select a tenant from the drop-down Tenant ID: list.
5. If you have already configured a policy, select it from the drop-down Policy ID: list and click Add to
add the policy. If you have not configured a policy, continue to the next step.
6. Enter a unique ID number in the Policy ID: field.
7. Select the policy type from the drop-down Policy Type list.
8. Enter the match criteria for the policy in the appropriate fields in the Select Match Criteria section.
9. To define the policy’s behavior, select an action from the drop-down Action list.
10. Select an option from the drop-down Redirect To: list and then select a destination from the drop-
down Target ID: list.
11. When you have configured all policy attributes, click Add.
To delete a policy, select it from the drop-down Policy ID: list and click Delete.
Configuring a Policy Association
After you configure a policy, you can associate it with specific resources, such as a network or endpoint.
1. Click Policy Association in the Configure menu. The Configure Policy Association window displays.
Active Fabric Controller User Interface
85