Owner's Manual

Figure 19. Configure Fabric Edge Interface Window

4. Select a provider from the drop-down Provider ID list.

5. Select the resource type (Middlebox, Mirror, Uplink, WAN port, or debug port) for the interface from

the drop-down Resource Type: list.

6. Enter a unique ID number in the Resource ID field.

7. (OPTIONAL) Enter a name in the Resource Name field and a description in the Resource Description

field for the interface.

8. If you enabled port mirroring, select the technology used for port mirroring (SPAN or RSPAN). If you

select RSPAN, enter the corresponding VLAN ID.

9. Click Add to save the configuration or click Close to close the window without saving changes.

Configuring Binding Edge Interfaces

To create a single, logically-bound uplinks, you can bind uplinks within a provider.

NOTE: You cannot bind an uplink more than once.

1. Click Bind Edge Interfaces in the Configure menu. The Bind Edge Interfaces window displays.

Active Fabric Controller User Interface