Owner's Manual

Configuring Networks

1. Click the Configure menu, click Users & Resources, then click Network.

The Configure Network window displays.

Figure 24. AFC GUI — Configure Network Window

2. Select the provider from the drop-down Provider ID: list.

3. To associate the network with a tenant, check the Tenant Network checkbox and select a tenant

from the drop-down Tenant ID: list.

4. Enter a unique ID for the network in the Network ID: field.

5. Enter the VLAN ID for the network in the Network VLAN field. The range is from 0 to 4094.

6. (OPTIONAL) Enter a name to identify the network in the Network Name field and the IP address, with

subnet, of the network in the Network IP field.

7. Click Add to save the configured network or click Close to close the window without saving

changes.

NOTE: To delete a network, select the provider and tenant, if applicable, from the drop-down

lists. Select the network to delete from the drop-down Network ID: list and click Delete.

Active Fabric Controller User Interface