Owner's Manual

Figure 27. AFC GUI — System Summary
Controller Summary
A controller summary displays information about each configured controller. The controller summary
includes the following information:
• Node IP — Displays the IP address of the node running the software and the controller’s role (active or
standby). The colored dots indicate the role as well — green for active or standalone and yellow for
standby. To view more information about the node’s operating environment and current operating
conditions, click the Get Details icon adjacent to the node IP.
• CPU % — Displays current and peak values. The peak value represents the highest recorded CPU
consumption since startup. The colored dots indicate conditions where CPU consumption exceeded
pre-set thresholds. You cannot configure the thresholds.
– Red — Indicates current consumption is greater than 90%
– Yellow — Indicates current consumption is between 61 and 89%
– Green — Indicates current consumption is less than 60%
• Memory % — Displays current and peak values. The peak value represents the highest recorded
memory consumption since startup. The colored dots indicate conditions where memory
consumption exceeded pre-set thresholds. You cannot configure the thresholds.
– Red — Indicates current consumption is greater than 90%
– Yellow — Indicates current consumption is between 61 and 89%
– Green — Indicates current consumption is less than 60%
• Uptime — Displays the days, hours, minutes, and seconds the node has been operational since last
startup.
Active Fabric Controller User Interface
97