Users Guide

Field Name Description

Volume Folder Specifies the name of an existing volume folder where a volume is to be

created. In case the folder does not exist, a new folder is created.

Purge Volume This property indicates that the volume must be purged. If the purge

option is not specified, the volume is still visible using the volume show

command and contains the status of the Recycled. The possible values are

yes

or no. The default value is yes.

Volume Notes Specifies the notes for the volume. By default, no notes are included.

Replay Profile Specifies the replay profiles for the volume.

Storage Profile Name Specifies the replay profiles for the volume.

Server Notes Specifies the optional user notes associated with the server.

Operating System Type Specifies the operating system type, which is set in the compellent server

object of the compellent storage center.

Server Object Folder Specifies the folder for the server.

Server WWN Values Specifies a globally unique World Wide Name (WWN) for the requested

HBA.

Port Type Refers to the transport type for all HBAs being added. This option is

required if the manual flag is set. The possible values are FibreChannel and

iSCSI.

Manual This parameter sets an optional flag to configure the requested HBAs

before the HBAs are discovered. If the WWN matches a known server port,

then this flag is ignored. If this flag is present, then the Port Type must also

be specified. The possible values are true or false.

Force Map If the value of this property is defined, it forces mapping, even if the

mapping already exists. The possible values are true or false.

Map Read Only Specifies whether or not a map is read-only. The possible values are true

or false.

Single Path Map Specifies that only a single local port can be used for mapping. If omitted,

all local ports are used for mapping. The possible values are true and false.

Configure SAN Switch Enables the zone configuration on the Brocade FC SAN switch.

NetApp Storage Settings

Target NetApp * Specifies the NetApp storage device where the volume will be created.

Storage Volume * Select the volume name on the NetApp array. To create a new volume,

from the

Storage Volume drop-down list, select Create New Volume.