Users Guide

For more information about the server settings, see Server Settings

8. Under

Network Settings, perform the following settings:

a. In the Identity Poolbox, enter the virtual identity pool from which virtual identities (MAC address

and WWPN/WWNN) will be selected for boot from SAN deployment.

b. Specify the networks that you want configure on the servers.

• For configuring interface on the Rack Servers, see Configuring Interface on Rack Servers

• For configuring interface on the Blade Servers, see Configuring Interface on Blade Servers

9. Click

Add.

Server Settings

Target Boot Device Description

Hardware Settings

Target Boot Device Specifies the target boot device ( for example: Local Hard Drive or SD

card).

System Profile Select the system power and performance profile for the server.

User Accessible USB Ports Enables or disables the user accessible USB ports.

Number of Core Processors Specifies the number of enabled cores per processor.

Processor Virtualization

Technology

If this is enabled, the additional hardware capabilities provided by

virtualization technology are enabled.

Logical Processors Each processor core supports up to two logical processors. If enabled,

the BIOS reports all logical processors. If disabled, the BIOS reports only

one logical processor per core.

Memory Node Interleaving If the system is configured with matching memory, enables memory

node interleaving. If disabled the system supports non-uniform memory

architecture memory configurations.

Execute Disable Enables or disable execute disable memory protection

Server Pool Specifies the pool from which servers are selected for the deployment.

OS Settings

OS Image Type Refers to the operating system types that are available for deployment,

such as Red Hat, Linux, Windows, and Hyper-V. The image type

corresponds to the installers that are shipped with ASM for installing a

particular type of operating system. For example, you can install Red Hat

6.1, 6.2, 6.3 images and install them all with the Red Hat image type.

NOTE

: Based on the value selected from the OS Image Type drop-

down list, the fields related to that OS type are displayed.