Users Guide
7. Under
OS Settings, perform the following:
a. To select the administrator password that you want to configure on the deployed OS, in the
Administrator password box, type the administrator password.
b. In the Confirm administrator password box, retype the password again to confirm.
NOTE: It is critical to update the password within this template. The value in the template is
masked, but the actual password is not set. If this password is not set, you cannot log in to
the deployed server.
c. From the
OS Image drop-down list, select an OS image that is configured and to be deployed in
your ASM managed environment.
d. From the OS Image Type drop-down list, select an OS image type that corresponds to the type
of OS image you have selected.
8. Under
Network Settings, update the network settings accordingly for the hypervisor that you are
deploying and for the configured networks in your environment.
9. To save the settings, click
Save.
10. To publish the template, click
Publish Template.
The template is now ready to be deployed.
Template – Deploy Physical Server and Virtual Machine
This template deploys two virtual machines to an existing cluster in vCenter.
1. On the
Templates page, select the Deploy Physical Server and Virtual Machine, and then click
Clone in the right pane.
2. In the
Create Template dialog box, enter the Template Name and Template Description.
3. In the Template Builder, click the server component, click Edit in the dialog box that is displayed, and
then in the Server Component
dialog box, perform the following configurations:
a. In the Component Name text box, type the component name. (Optional)
b. Under Hardware Settings, from the Server Pool drop-down list, select the corresponding server
pool.
NOTE
: It is critical to update the password within this template. The value in the template is
masked, but the actual password is not set. If this password is not set, you cannot log in to the
deployed server.
4. Under OS Settings, perform the following:
a. To select the administrator password that configures on the deployed OS, in the Administrator
password
text box, type the administrator password. In the Confirm administrator password
box, type the password again to confirm.
b. From OS Image Type drop-down list, select an OS image type that corresponds to the type of
OS image you have selected.
c. From OS Image drop-down list, select an OS for a hypervisor (Example: ESXi 5.1) which is
configured to be deployed within your ASM managed environment.
5. Under
Network Settings section, update the network settings accordingly for the hypervisor you are
deploying and for the configured networks in your environment.
6. In the Template Builder, select the cluster component, click Edit in the box that is displayed, and
then configure the .following settings in the Cluster Component dialog box.
7. In the
Component Name text box, type the component name. (Optional)
51