Users Guide

4. On the

Template Builder page, click each server components in the swim lane, and configure the

following settings for both the servers:

a. Modify the server Component Name with a unique name, if required.

b. Under

Hardware Settings, configure the following:

1. Retain the default selection of Local Hard Drive for Target Boot Device.

2. Select a

Server Pool that contains a target server from the drop-down list.

c. Under OS Settings, configure the following:

1. Enter the Windows Product Key for the Hyper-V server.

2. Select the Timezone and enter the IP address of the NTP Server for time synchronization.

3. Select the Language and Keyboard inputs if you want to change the default values.

4. Enter the Domain Name and FQ Domain Name to which you want to add the Hyper-V

host.

5. Enter the Domain Admin Username and Domain Admin Password to add the Hyper-V host

to the domain. Enter the domain admin password to confirm.

6. Enter the Administrator password that you want to configure the deployed OS. Reenter

the administrator password to confirm.

NOTE

: It is critical to update the password within this template. There is a masked

value present in the template, but there is no actual password set. If you do not set

this password, you will not be able to log in to the deployed server.

7. Select the OS Image

configured for Hyper-V to deploy within your ASM managed

environment.

8. Retain the default selection of Hyper-V for OS Image Type.

d. Under Network Settings, update the network settings based on the hypervisor that you want to

deploy and the networks you have configured in your environment.

e. Click Save.

5. On the

Template Builder page, click the Hyper-V cluster component, click Edit in the box that is

displayed, and configure the following settings in the Cluster Component dialog box.

a. Make sure that you select your target SCVMM hypervisor from the Target Hypervisor drop-

down

list.

b. Select an existing host group from the Host Group drop-down list or enter the name of the host

group that you want to create in the New Host Group name field.

c. Enter the name of the Host Group you want to create or select the name of an existing host

group.

d. Modify the Cluster Name, if required.

e. Click Save.

6. Click

Publish Template.

This template is now ready to be deployed.