Users Guide

Target Boot Device Description

NOTE: If you select EXSi, CentOS, Linux from OS Image Drop down

menu, a field, NTP server is appeared. This is an optional

component but we highly recommend you to enter NTP server IP in

the field to avoid deployment failure. If you select Windows from OS

Image drop down menu,

NTP Server field is not appeared. In that

case you need to select Install HyperV option to get the NTP server

field. It is required to fill the NTP Server field for HyperV deployment.

Administrator password Enter the administrator password that set on the installed OS.

Confirm administrator

password

Enter to confirm the administrator password.

Install EqualLogic MEM If the value is True, install EqualLogic Multipathing Extension Module.

Product Key Specifies the product key to install the OS image on the server.

Timezone Specifies the time zone of the server.

NTP Server Specifies the IP address of the NTP server for time synchronization.

Language Specifies the language to be displayed in the installed operating system.

That is, Windows operating system.

Keyboard Specifies the key board language to be used during Windows installation.

Domain Name Specifies the domain name to which you want to add the host. For

example, aidev

FQ Domain Name Specifies the Fully Qualified Domain Name (FQDN) to which you want to

add the host. For example, aidev.com

Domain Admin Username Specifies the username to access the domain.

Domain Admin Password Specifies the admin password to add the host to the domain.

Domain Admin Password

Confirm

Enables you to reconfirm the admin password to add the host to the

domain.

Custom Installation OS

Script

Refers to ASM maintained kickstart scripts or unattend.xml customer

specific scripts to be used as a part of unattend OS install.

NOTE: After entering the information about PXE network in the respective field as described in the

table here, ASM will untag vLANs entered by the user in the PXE network on the switch server facing

port. In case of vMotion and Hypervisor network, for the entered information ASM will tag these

networks on the switch server-facing ports. In case of Rack Server, ASM will configure those vLANs

on TOR server facing ports (untag PXE vLANs, and tag other vLANs). In the case for Blade Servers,

ASM will configure those vLANs on the IOM server facing ports (untag PXE vLANs and tag other

vLANs).