Users Guide
NOTE: It is critical to update the password within this template. There is a masked
value present in the template, but there is no actual password set. If you do not set
this password, you will not be able to log in to the deployed server.
7. Select the OS Image configured for Hyper-V to deploy within your ASM managed
environment.
d. Under Network Settings, update the network settings based on the hypervisor that you want to
deploy and the networks you have configured in your environment.
e. Click Save.
5. On the Template Builder page, click the Hyper-V cluster component, click Edit in the box that is
displayed, and configure the following settings in the Cluster Component dialog box.
a. Make sure that you select your target SCVMM hypervisor from the Target Hypervisor drop-
down list.
b. Select an existing host group from the Host Group drop-down list or enter the name of the host
group that you want to create in the New Host Group name field.
c. Enter the name of the Host Group you want to create or select the name of an existing host
group.
d. Modify the Cluster Name, if required.
e. Click Save.
6. Click Publish Template.
This template is now ready to be deployed.
Related Tasks
Template – deploy Citrix XenDesktop for 500 users
Template – deploy operating system to hard drive
Template – deploy physical server and virtual machine
Template – deploy virtual machines to cluster
Template – install ESXi to SD card with Fibre Channel storage
Template – install ESXi to SD card with iSCSI storage
Template – deploy Hyper-V host with iSCSI storage
Template – deploy Hyper-V cluster with Fibre Channel storage to SCVMM
Template – deploy VMware cluster with NetApp storage
Template – boot from Fibre Channel SAN
Template – boot from iSCSI SAN
Template – deploy virtual machine template clone on Hyper-V cluster
Template – deploy virtual machine template clone on VMware cluster
Template – deploy Hyper-V cluster with Fibre Channel storage to SCVMM
The Deploy Hyper-V Cluster with Fibre Channel Storage to SCVMM template deploys two Fibre Channel
storage volumes, installs Hyper-V on two physical hosts, and creates a cluster with the Hyper-V hosts.
To deploy Hyper-V Cluster with Fibre Channel Storage to SCVMM using this template, perform the
following steps:
1. On the Templates page, select the Deploy Hyper-V Cluster with Fibre Channel Storage to SCVMM
template, and click Clone in the right pane.
2. In the Create Template dialog box, enter a name, category, and description for the template, and
click Save.
77