Install Guide

Configuring ASM Virtual Appliance for

NetApp Storage Support

For ASM to support NetApp, perform the following tasks:

• Add NetApp Ruby SDK libraries to the appliance. For more information about adding SDK libraries, see

Adding NetApp Ruby SDK.

• Enable HTTP/HTTPs for the NFS share. For more information, see Enabling HTTP or HTTPs for NFS

Share.

Make sure that license is enabled for NFS on NetApp. To obtain and install the license, refer NetApp

documentation.

• Create the credentials to access NetApp Storage. For creating credential, see Active System Manager

Release 8.2.1 User’s Guide.

• Configure the NetApp Storage Component. For more information, see Configuring the NetApp

Storage Component.

• Configure the fileshare Network on the server component. For More information, see Active System

Manager Release 8.2.1 User’s Guide.

Adding NetApp Ruby SDK to ASM Virtual Appliance

NetApp Manageability SDK files are available to download directly from NetApp. You need a NetApp

NOW account to download the SDK. These files are DfmErrno.rb, NaElement.rb, NaErrno.rb, and

NaServer.rb

The NaServer.patch file is available on the ASM appliance at location /etc/puppetlabs/puppet/modules/

netapp/files/NaServer.patch You will need the above files to proceed further. Contact your administrator

for any additional patch files, or updates.

1. Log in to the ASM Appliance.

2. Download and copy the NetApp SDK Ruby lib files to the ASM Appliance /tmp/*.

3. Copy these Ruby libs files from /tmp to /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/

network_device/netapp

# sudo cp /tmp/*.rb /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/

netapp

4. Copy any patch file(s) to the ASM Appliance /tmp directory, currently there is NaServer.patch

# sudo cp /etc/puppetlabs/puppet/modules/netapp/files/NaServer.patch /tmp